evening all,

i am looking to transfer my single brake fluid reservoir, which is currently mounted to the scuttle, to two separate individual reservoirs to allow for an interchangable scuttle system [one with screen and one without - don't ask for details, its a long story]

i have been looking at these wilwood master cylinders, 0.75 for front calipers and 0.625 for rear

http://www.rallydesign.co.uk/popup_image.php?pID=4053

i have a question regarding the low level brake fluid warning light.

Do you have to have one to pass MOT? if you do, can anyone offer up idea's on how you would install one with these cylinder reservoirs?

cheers

Im sure you just have to be able to show the light is working.

you can use this
http://www.cbsonline.co.uk/brake-fluid-reservoir-cap-flcap-129-p.asp

quote:

---

Originally posted by doddy
you can use this
http://www.cbsonline.co.uk/brake-fluid-reservoir-cap-flcap-129-p.asp

---

they fit on my girlin res pots

quote:

---

Originally posted by doddy
they fit on my girlin res pots

---

mine used to pass its MOT without one so i don't think it is needed, although probably a good idea to have one if you can

[Edited on 23/3/10 by bigfoot4616]

Save a lot of money

Clutch mastercylinder for series 3 Landrover 0.75" bore

http://www.paddockspares.com/pp/SERIES/Clutch/Clutch_master_cylinder-S111.html

http://www.landroverspares.co.uk/product.html?cpdID=468

quote:

---

Originally posted by omega0684
i have been looking at these wilwood master cylinders, 0.75 for front calipers and 0.625 for rear

---

quote:

---

Originally posted by adithorp

quote:

---

Originally posted by omega0684
i have been looking at these wilwood master cylinders, 0.75 for front calipers and 0.625 for rear

---

Yes those are the sizes dax supply as standard with their pedal boxes. 0.625 is the m/c for the front circuit.

I think you might have that ^^^ the wrong way around.

I've never seen the fliud level sensor checked at MOT.

adrian

---