Board logo

Spotted going through Tenterden, Kent tonight
richardh - 3/8/10 at 08:07 PM

3 7's and a fury heading in convoy about 8pm !
Never knew there were so many in the area


Hugh_ - 3/8/10 at 09:43 PM

Part of the Southern Kit Car Club, on route to the pub in Wittersham.

OTOH, there was 1 from Benenden, 2 from Maidstone, 1 from Ashford, 1 from Paddock Wood, 3 from Sevenoaks Way, and 2 from Crawley there this evening.

SKCC

[Edited on 3/8/10 by Hugh_]


steve m - 3/8/10 at 10:08 PM

Who were the two from Crawley ??

as im the only locoster in crawley !!!

and my car is at my Mums house!

was it being driven by a 70 yr old female ??????????


Hugh_ - 3/8/10 at 10:49 PM

Paul with the Yellow westie and Bryan in the passenger seat (as he binned his MNR in Wales a week or so back).

[Edited on 3/8/10 by Hugh_]


contaminated - 3/8/10 at 11:37 PM

I was one of the 7s in Tenterden. The Fury was actually a Pheonix.


jeffw - 4/8/10 at 05:25 AM

Or Phoenix even

That was me !!!!!!!


Ben_Copeland - 4/8/10 at 06:30 AM

quote:
Originally posted by richardh
3 7's and a fury heading in convoy about 8pm !
Never knew there were so many in the area


There's loads of us in Kent and around that area. Ashford has a few in it too! If your interested pop over to the SkCC website and join in the next run out!


Richard Quinn - 4/8/10 at 06:50 AM

quote:
Originally posted by steve m
as im the only locoster in crawley !!!


[img][/img]


steve m - 4/8/10 at 10:30 AM

I am NOT that fat !!

hahahaha

I presume there are more of us in Crawley
but i WAS the first


adithorp - 4/8/10 at 12:53 PM

quote:
Originally posted by jeffw
Or Phoenix even

That was me !!!!!!!


You're back on the road then?

adrian


jeffw - 4/8/10 at 01:52 PM

ohhhh yes


adithorp - 4/8/10 at 04:02 PM

So whats the engine spec', Jeff? I take it it's not standard.

adrian


jeffw - 4/8/10 at 04:53 PM

"CNC Heads" Port/Polished head/Big Valves, Cams, Motorsport Lifters on a new Zetec Blacktop. Ric Woods of CNC Heads reckons I'll make 235-245BHP on the Jenveys with this head. I'm getting it mapped by ATPower next week (on the Megasquirt MS1 for now) and then I'll change over to the Emerald during the winter and probable get Dave Walker to map it then.

It has a AP 4 puck clutch and steel flywheel, fresh BGH HD close ratio Type 9 with alloy casings. Raceline sump, bellhousing and waterrail to go with the Quaife ATB in the English Axle.


Nash - 4/8/10 at 11:59 PM

I was in the Indy directly behind Jeff in the Phoenix. Clearly holding me up not

Pop over to southernkitcars and say hello we've been out a lot this year and in the next few weeks we have a Trackday at Lydden, a blat to France and early breakfast runs most Sunday mornings.

The Swan in Wittersham is a nice pub. Thats where we were all going last night.

.................Neil