Morning All,

Does anyone know what thread is on the inlet water jacket hole between cylinders 2 & 3 on the inlet manifold please?

Cheers

Alex

which version of the manifold ?

errrrr the one in the burton catalog

its the one at the top of the list if you search "pinto DCOE manifold" (INLET MANIFOLD SOHC PINTO 2x45DCOE 3.4"

this link might work

Burton Link

Alex

[Edited on 2/9/10 by omega0684]

It's an NPT thread - not sure on size but i have a tap for it at home.....

just checked my old posts and can confirm it is 3/8 NPT



[Edited on 2-9-10 by DaveFJ]

working linky

sorry I've got no idea
I know all the stock ford stuff is NPT....

I've only got stock EFI ones or a bogg bros ZX9R one (much like your old Bogg Bros R1 manifold)




[Edited on 2/9/2010 by mcerd1]

Standard is 1/4 NPT IIRC

thats the little water temp sensor on the block. I believe he is refering to the much larger one in the center of the inlet manifold which is 3/8NPT

Water temp sensor is 1/8NPT, oil pressure sensor is 1/4 NPT

You are right it may well be 3/8NPT for the water outlet.

[Edited on 2/9/10 by flak monkey]