A bit O/T but I am looking for a website that shows the dimensions of brake calipers/carriers.
Anyone know of such a site???
Specifically I am interested in the Rover 200/400 calipers and the dims of the carriers and the possibility of using the 282mm set up from the ZR cars
on a BMW Mini.
I know adapters can be made but it would be great if they bolted straight on
Thanks,
Mark
[Edited on 2/11/10 by tul214]
Zt are five stud disc's. zs 180 are 4 stud and 282mm also the same pcd as the mini.
Sorry mate, i've edited the 1st post, I meant ZR/ZS. I know that they are 4x100 mm discs the same as a mini, and the bore is the same too,
sooo....if the carrier holes lined up as well I am laughing
If you're stuck I'll whip the wheels and take some dims from the ZR160 outside
Really
If you could that would be great
And whilst your at it, take them off, stick em in a box and send too......
Cheers,
Mark
200/25/400/45/ZR/ZS range parts have no relation to the BMW MINI as they share dimensions with Honda parts. Same goes for the Freelander which is
early 90' Rover 214 /Honda Concerto based.
However the 75/ZT front end used BMW specified parts.
[Edited on 2/11/10 by britishtrident]
quote:
Originally posted by britishtrident
200/25/400/45/ZR/ZS range parts have no relation to the BMW MINI as they share dimensions with Honda parts. Same goes for the Freelander which is early 90' Rover 214 /Honda Concerto based.
However the 75/ZT front end used BMW specified parts.
[Edited on 2/11/10 by britishtrident]