Board logo

Help needed - Ford Cortina mk3 dashboard pre facelift
xico_ze54 - 26/11/10 at 04:58 PM

hi
can somebody help me with the dissasemble of a Cortina mk3 pre facelift dashboard? I got the Haynes manual but no information about that matter.
I had withdraw some downwards screws but in the top the dash mantains very firmly. somebody who passed by that job please tell me something.
thank you.
Amadeu

jollygreengiant - 26/11/10 at 05:10 PM

usually some bolts and screws hidden behind switches/finishing panels, then the padded top section is held by screws to the front and bolts/screws underneath near the bottom of the windscreen.

HTH

[Edited on 26/11/10 by jollygreengiant]

xico_ze54 - 26/11/10 at 06:42 PM

quote:
Originally posted by jollygreengiant
usually some bolts and screws hidden behind switches/finishing panels, then the padded top section is held by screws to the front and bolts/screws underneath near the bottom of the windscreen.

HTH

[Edited on 26/11/10 by jollygreengiant]

thanks but I rather prefered a instruction directly from one that made the task.

jollygreengiant - 26/11/10 at 07:43 PM

quote:
Originally posted by xico_ze54
quote:
Originally posted by jollygreengiant
usually some bolts and screws hidden behind switches/finishing panels, then the padded top section is held by screws to the front and bolts/screws underneath near the bottom of the windscreen.

HTH

[Edited on 26/11/10 by jollygreengiant]

thanks but I rather prefered a instruction directly from one that made the task.



Trouble is its been about twenty years since I took one out. Maybe even Twenty Five. Its just a matter of LOOKING, The bolts and screws aint going nowhere. Unless of course YOU remove them, that is.