Board logo

Anyone used Simply Bearings?
owelly - 13/2/11 at 10:51 PM

There's a good bearing finding thingy on here:
http://simplybearings.co.uk/shop/index.php
Has anyone used them? They listthe spigot bearing I need as £2.20. Which is nice....


eddie99 - 13/2/11 at 10:55 PM

I used them in december and it ended up taking forever to arrive. About 2 weeks but this was also when royal mail were still recovering from snow problems.. But bearings were fine....


stevec - 13/2/11 at 11:06 PM

I have used them a few times, first class service and reasonable prices.

Steve


ashg - 13/2/11 at 11:27 PM

used them loads of times, usually come in a day or two, bearingboys.co.uk are also good


Chippy - 13/2/11 at 11:47 PM

I have used them three times, and on each occasion they were more than helpful, quick delivery, and good quality bearings, (mind you I do go for the better end of the ranges). HTH Ray


matt_gsxr - 13/2/11 at 11:49 PM

I've purchased from them a few times.

Ironically rubber O-rings. Bit strange given that they are called simply bearings!!!

Delivery was prompt and the parts were much cheaper than Suzuki for the same bits. Very good supplier.

Matt


40inches - 14/2/11 at 12:26 PM

Used three times, next day delivery and cheap


scudderfish - 14/2/11 at 12:44 PM

£195 + VAT, but a 127mm diameter chrome steel ball bearing would have made one hell of a marble when I was a kid!


owelly - 14/2/11 at 10:57 PM

Cheers for the replies folks. I'll double check my spigot bearing OD and get an Oilite bush ordered.
Ta.