Whilst I really want a paddle-shifter, I just can't justify the extra expense (it would have to be a no-compromise AB Performance one at £280 if I went for it).

So, I'm going to run with a short lever mounted at steering-wheel height (it's a single-seater) and a cable.

Does anyone know of anyone who makes a nice lever / pivot kit, or can recommend individual components to make my own?

Cheers

Scotty

If you really want a paddle shift I would get one as it will bug you for the rest of the build if you compromise.

Ive just received mine from Andy today and you're right it's pricey but its good and the customer service and advice he dishes out is second to none.

http://www.techtronicsracing.com/




http://tinyurl.com/3fzg7lm



I have a Pingel electro setup, paid £275 for it, just needs switches on the steering wheel if I want them.

The air shifter operates much the same, other than the actuator is pnuematic

[Edited on 20/5/11 by T66]

Cheers Ivan, but i want a mechanical shifter as I had an MK R1 for a short-while with a klick-tronic and couldn't get on with it.

http://www.pingelonline.com/components.htm

MNR do a cable setup for sierra columns for around £300