Right, either these bits are very hard to find or I'm having a brainblock as to what they are called!
I've got a 8mm outlet on a fuel tank that I don't need. I want a 8mm rubber blank to go over it (to be clamped with a hose clamp). I.e. like
a fuel hose but only a couple of inches long,and closed on one end.
Can anybody show me where I can get one of these?
It's just to have a neater solution than using a bolt clamped inside a hose 
Put an 8mm brass plug in the outlet if its threaded.
The only thing I can think off is the rubber blanked off thingy that goes on a Pinto water pump.
Most people use a short bit of hose with a bolt clamped in.
I just used a short bit of hose with a bolt clamped in it.
my reasoning is that nobody is ever going to see it.
I might have one of the pinto waterpump blanks if you want it.
Andy.
quote:
Originally posted by snapper
The only thing I can think off is the rubber blanked off thingy that goes on a Pinto water pump.
Most people use a short bit of hose with a bolt clamped in.