Home turned 1/3 scale v10 engine- without CNC!

Just the images:
http://imgur.com/a/Utc6z


Whole forum thread....
http://www.modelenginemaker.com/index.php?topic=3007.0


Beautiful work!

Wow

True skill!

Those pics are better than porn,

I never understand how or if the make water channels or not?

You don't see them in the pictures.

He cheated - it looks like he bought the timing belts

Seriously though, I would love to have a fraction of that skill.

Pic 36
shows him drilling through the block and bores with a long drill before the liners go in, think this might be the water passages for the block.



]Originally posted by bi22le
I never understand how or if the make water channels or not?

You don't see them in the pictures.

There is skill involved, lots of it but nothing compared to the amount of patience. Imagine making the block then drilling one of the holes in the wrong place.. argghhhh.

How come he didnt use a single crank?

[Edited on 2/1/15 by 02GF74]

Excellent project, and really good forum too.
Thanks for the link James

quote:

---

Originally posted by 02GF74
There is skill involved, lots of it but nothing compared to the amount of patience. Imagine making the block then drilling one of the holes in the wrong place.. argghhhh.

How come he didnt use a single crank?

[Edited on 2/1/15 by 02GF74]

---

^^^ you're right, got thrown by the cam timing pulleys.

Thought I'd bump this thread because he's done some amazing work in the last few months. Good times!