Xtreme Kermit
|
| posted on 16/4/10 at 10:27 PM |
|
|
Heat reflective sleeve - from where?
Having removed my snapped clutch cable, it seems pretty obvious that it has broken at the point nearest the exhaust fanimold.
Whilst the cable had some heat reflective material on it, I need some better stuff as it seems that the plastic outer has melted and the inner has
rusted causing the failure.
Does anyone know where I can get some propper heat reflective sleeving from?
|
|
|
|
|
daviep
|
| posted on 16/4/10 at 10:33 PM |
|
|
I'll definatley be using the word "fanimold" tomorrow. 
Puerile I know
|
|
|
iank
|
| posted on 16/4/10 at 11:03 PM |
|
|
Rally Design sell stuff good for 550C in 1m lengths
http://www.rallydesign.co.uk/advanced_search_result.php?keywords=+Heat+Reflective+Tube&x=4&y=6
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
|
blakep82
|
| posted on 17/4/10 at 12:26 AM |
|
|
fanimold brilliant
yeah, rally design, wot he said
[Edited on 17/4/10 by blakep82]
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Simon
|
| posted on 17/4/10 at 01:40 AM |
|
|
CBS do heat blanket etc
ATB
Simon
|
|
|
snapper
|
| posted on 17/4/10 at 04:42 AM |
|
|
Don't what engine you have but on my Pinto I used the much longer Cosworth 2WD one, this loops over and under the manifold not through it as
with the standard one
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
speedyxjs
|
| posted on 17/4/10 at 07:13 AM |
|
|
Thats my new favourite word
How long can i resist the temptation to drop a V8 in?
|
|
|
rusty nuts
|
| posted on 17/4/10 at 07:45 AM |
|
|
Not as good as "lubrificated" as seen on instructions for a 2CV air filter yesterday
|
|
|
Xtreme Kermit
|
| posted on 17/4/10 at 03:00 PM |
|
|
top job - thanks guys!
550 c in 1 metre lengths is just what the doctor ordered.
I could really do with a shorter one if anything, as I have a pinto with a high exit exhaust, so it needs to duck under it before it goes too far.
However having had my head stuck down the foot well for an hour, the new standard one works a treat.
|
|
|
.jpg)
