matt.c
|
posted on 3/1/11 at 02:36 PM |
|
|
2 Stroke Exhaust paint
I need to paint the exhaust black on my Rotax Max kart .
What paint should i use?
Would prefer aerosol can spray.
The exhaust gets bl**dy hot as its a one piece 2 stroke system.
Last time i painted it the paint just burnt off when it got hot.
Any ideas?
Cheers
matt
|
|
|
trikerneil
|
posted on 3/1/11 at 02:44 PM |
|
|
I've used BBQ paint on 4 stroke exhausts with some success.
HTH
Neil
ACE Cafe - Just say No.
|
|
RichardK
|
posted on 3/1/11 at 02:47 PM |
|
|
Yep I used bbq paint on my lads ts125r, no problems so far, I used this stuff fyi, nice satin finish. Plastikote BBQ Spray Paint -
400ml on eBay (end time 05-Jan-11 15:51:07 GMT)
Cheers
Rich
[Edited on 3/1/11 by RichardK]
Gallery updated 11/01/2011
|
|
dlatch
|
posted on 3/1/11 at 03:08 PM |
|
|
not had much luck with the high temp paints on my 2 stroke exhausts they all tend to flake off eventually
|
|
Yazza54
|
posted on 3/1/11 at 03:41 PM |
|
|
We tufftrided our TKM and 125 ICC exhausts/expansion chambers
I'm unhappy cos I eat and I eat cos I'm unhappy
|
|
adam1985
|
posted on 3/1/11 at 04:48 PM |
|
|
What about the stuff for spraying wood burning stoves might be the same as bbq spray but worth a look
|
|
computid
|
posted on 3/1/11 at 05:26 PM |
|
|
I use halfords high temperature exhaust paint (aerosol) on my scooter, seems to work a treat.
|
|
MakeEverything
|
posted on 3/1/11 at 05:56 PM |
|
|
How about bluing?
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
rotax78
|
posted on 3/1/11 at 05:56 PM |
|
|
Give it a good clean with steel wool then spray with wd40, gives a good finish when burned off and easy to "top up" I have always done
this with my 100's, rotax and gearbox karts.
|
|