t11
|
| posted on 23/12/12 at 04:24 PM |
|
|
Cooling pipe's
Hi All.......does any one know where I can get some water pipe's made up, they have to run side by side with 90deg bends at either end,
I've tried Merlin motor sport but they can only do a radius of 112mm...any idear's.........
|
|
|
|
|
mark chandler
|
| posted on 23/12/12 at 05:07 PM |
|
|
I used 1" central heating copper pipe and soldered 90 degree elbows.
|
|
|
russbost
|
| posted on 23/12/12 at 05:22 PM |
|
|
I can make up anything you want in ali tube in either 25mm or 32mm, with beaded ends but I will need to check what minimum radius is I can do, I have
a suspicion it may be same as Merlin 
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
renetom
|
| posted on 23/12/12 at 05:58 PM |
|
|
pipes
Hi
I agree 22 or 28mm copper pipe
With 90 degree yorkshire elbows.
Cheap as chips, job done.
Good luck
René
[Edited on 23/12/12 by renetom]
|
|
|
austin man
|
| posted on 23/12/12 at 07:13 PM |
|
|
you could always cut it at 45 degrees and weld or fit samco elbows
Life is like a bowl of fruit, funny how all the weird looking ones are left alone
|
|
|
britishtrident
|
| posted on 23/12/12 at 07:15 PM |
|
|
Use straightish hoses with bends or black plastic 90 degree bends used for Koi ponds and irrigation.
[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]
|
|
|
T66
|
| posted on 23/12/12 at 07:35 PM |
|
|
Truflex stainless will bend, guy on Ebay will sell you lengths of your choice.
|
|
|
.jpg)
