Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Jeep j10 auto gearbox problem
corrado vr6

posted on 3/5/13 at 08:46 PM Reply With Quote
Jeep j10 auto gearbox problem

Hi there, I'm asking this on behalf of a mate (honest it is for a mate lol) but he has a j10 which seems to be pulling away in 2nd and not 1st gear, he seems to have to rev the engine whilst going along to make the gearbox catch up to change gear but when it does it seems to go to top gear (3rd) it only changes gear once and that's around the 50mph mark.
Unfortunatley he seems to think that originally it was working ok (but can't be sure) until he was driving at night when it was first going and accidentally went to high with the gear lever snd selected reverse whilst going along the engine cut out and then wouldn't start, it was left and then jumped in the morning and it fired and ran but since he seems to think its now pulling away in 2nd and not 1st, could the accidental reverse caused this? When reverse was slightly selected the instant reaction so I'm told was to let go of the gear selector.

The transmission fluid was low before it was ran but was topped up and is still ok although it was never completely drained and refilled
Any ideas?
It's a V8 lump btw





http://r1indy7.wordpress.com/

View User's Profile E-Mail User View All Posts By User U2U Member
britishtrident

posted on 3/5/13 at 08:59 PM Reply With Quote
Sounds like a broken brake band in the gearbox to me.





[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]

View User's Profile View All Posts By User U2U Member
britishtrident

posted on 4/5/13 at 06:19 AM Reply With Quote
A thought occurred to me I assumed the Jeep has an AMC or Chrysler engine and matching Torqueflite transmission, if it has a V8 transplant from an older Chevy it could have a Powerglide transmission which only has 2 gears.

This story high lights the dangers of hand shifting an automatic, the selector levers on transmissions of this era were not designed for hands shifting it is very easy to go through Drive into Reverse or even into Park.

[Edited on 4/5/13 by britishtrident]





[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]

View User's Profile View All Posts By User U2U Member
corrado vr6

posted on 4/5/13 at 07:17 AM Reply With Quote
Ok thanks for your reply! Ill pass on what you have said and see what the situation is
Thanks again





http://r1indy7.wordpress.com/

View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.