steve m
|
| posted on 11/1/14 at 06:21 PM |
|
|
What size hole to tap 5/16 x24 ?
I need to make a couple of sleeves, for adjustment
So What size hole to tap 5/16 unf x 24 ?
im guessing around 6mm
thanks
steve
Thats was probably spelt wrong, or had some grammer, that the "grammer police have to have a moan at
|
|
|
|
|
Wadders
|
| posted on 11/1/14 at 06:38 PM |
|
|
6.9mm according to my dormer book.
[Edited on 11/1/14 by Wadders]
|
|
|
rick1962uk
|
| posted on 11/1/14 at 06:43 PM |
|
|
i use an app called garage buddy pro its worth its weight in gold for building engines and kits
for the tap you will need a .2720" or 6.909 mm
|
|
|
steve m
|
| posted on 11/1/14 at 06:55 PM |
|
|
cheers, guys,
steve
Thats was probably spelt wrong, or had some grammer, that the "grammer police have to have a moan at
|
|
|
