pewe
|
| posted on 12/8/19 at 10:13 AM |
|
|
Brake pipe - help
Whilst replacing the FL caliper on the 5 Series i went to re-new the flexi only to find that the union on the steel pipe heading into it
wouldn't undo to the extent it's twisting the pipe. That's despite spraying penetrating oil up into and around the join.
Car's only(!) 9 years old and corrosion free.
Any suggestions as to how I can release it short of knackering the steel pipe with grips and having to replace it?
Heat probably not an option...
TIA.Cheers, Pewe10 
|
|
|
|
|
theconrodkid
|
| posted on 12/8/19 at 10:18 AM |
|
|
spanner on the union and one on the flexi is all i can recomend....unless you can get some heat in there
who cares who wins
pass the pork pies
|
|
|
voucht
|
| posted on 12/8/19 at 10:28 AM |
|
|
Hi,
I would try locking pliers in the steel pipe, tight enough so it doesn't twist, and not tight enough to crush it.
Steel pipes are pretty hard, so they are more unlikely to be crushed than copper ones.
An then a spanner on the union.
Hope that can help 
https://vouchtroadster.blogspot.com/
https://cafrazx550.blogspot.com/
|
|
|
johnemms
|
| posted on 12/8/19 at 10:33 AM |
|
|
You don't rotate the steel pipe or it will shear off - you rotate the flexi pipe 
Own chassis & Build - First time pass!!
"7's" aren't really "cars", they are 'experiences"
|
|
|
pewe
|
| posted on 12/8/19 at 10:50 AM |
|
|
Thanks for the replies.
Problem is the flexi has star shaped flanges which fit into the mounting bracket so nothing to purchase on there.
I just managed to avert disaster as the steel pipe was twisting as I applied force to the union.
I suppose locking pliers on the steel pipe could be the answer - the union will either undo or fook the pipe in which case I'll be replacing it
anyway
Very reluctant to try flame heat, Conrod - though maybe use a big ass soldering iron?
Cheers, Pewe10
|
|
|
theconrodkid
|
| posted on 12/8/19 at 02:06 PM |
|
|
i seem to remember the fixing you mention, is the flexi not held into it,s fixing with a clip ?
who cares who wins
pass the pork pies
|
|
|
pewe
|
| posted on 12/8/19 at 03:14 PM |
|
|
quote:
Originally posted by theconrodkid
i seem to remember the fixing you mention, is the flexi not held into it,s fixing with a clip ?
Good point I'll have a look at it when I can be arsed to take the wheel off for the umpty tumph time...
|
|
|
