r1_manx
|
posted on 10/12/09 at 11:06 AM |
|
|
2003 R1 throttle cable
I've been looking at what needs doing for the throttle cable on my 2003 R1 mini. So far, i've removed both of the main cables (pull and
push) and then bought a standard push bike brake cable as recommended by some other users on here. Now the cylinder shaped nipple on my bike cable is
too big to fit into the hole on the throttle body. Do I now need to cut the nipple off (sounds horrible :0) and then find another of suitable size
that can be soldered on or screwed/clamped on? Would appreciate any advice on this guys, just want to find an ideal solution....
Cheers
If im not in action, im in traction!
|
|
|
progers
|
posted on 10/12/09 at 11:34 AM |
|
|
If you are careful you can simply file the existing nipple down so that it fits the hole in the throttle body. The alternative is, as you say to cut
and solder a new nipple on. I did the former
- Paul
|
|
r1_manx
|
posted on 10/12/09 at 11:38 AM |
|
|
Cheers for that Paul....I've got a set of small files that would probably do the job so will have a go with that method first and see how I get
on.
If im not in action, im in traction!
|
|
stuart_g
|
posted on 10/12/09 at 12:26 PM |
|
|
MNR supplied me a cable for my R1 powered Vortx when I built it which fitted without modification. Maybe a call to them to see where they get them
from or could they supply you one.
I thought bicycle cables where the correct size. I need one aswell so interested in the outcome.
|
|
afj
|
posted on 10/12/09 at 07:23 PM |
|
|
3.99 push bike brake cable for mine from halfords nipple end fits TBs fine
eerrrrrrrrrrrrrrrr
|
|
r1_manx
|
posted on 14/12/09 at 02:46 PM |
|
|
Well, in the hunt for a throttle cable end that fits my 03 R1, I went down to my local push bike shop at lunch and showed them the R1 throttle cable,
explaining that I need a push bike brake cable with the same size nipple on the end. I checked both types as apparentky Shimano have a slightly
different nipple on them, and neither of them match the R1 nipple size? Does the nipple on the Halfords cable match the R1 exactly? The guy in the
workshop at the bike place said there are only 2 standard sizes available. I can always get a custom one made up but hoped to find a cheap solution
in the push bike cable. Any advice would be great.
If im not in action, im in traction!
|
|
afj
|
posted on 14/12/09 at 07:30 PM |
|
|
arrrggghhh now i remember i filled my nipple down ever so slightly
eerrrrrrrrrrrrrrrr
|
|
lococost
|
posted on 15/12/09 at 02:33 PM |
|
|
quote: Originally posted by afj
arrrggghhh now i remember i filled my nipple down ever so slightly
that sounds painfull!
|
|
Peteff
|
posted on 15/12/09 at 04:47 PM |
|
|
I got a universal scooter throttle cable from the bike shop. There's a nipple on one end which fits the carbs and the other end is blank so I
fitted an electrical connector at the pedal end.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|