blueskate
|
posted on 5/1/10 at 04:55 PM |
|
|
Propshaft bolts
Hi All,
Anyone know where i can get some propshaft bolts from? Do the need to be High tensile?
Thanks!
Semper Paratus!
|
|
|
Stuart_B
|
posted on 5/1/10 at 04:59 PM |
|
|
i would say ford
stuart
black mk indy, 1.6pinto on cbr600 bike carb's.
|
|
chasmon
|
posted on 5/1/10 at 05:00 PM |
|
|
Assuming they're for a sierra diff, bought mine from Westfield. Bought some from Ford but they were the wrong part despite them double
checking...
Sierra is not a standard fastener its a fine pitch metric M10 from memory... Oh and yes HT is requirred IMHO. 12.9 should do it.
|
|
blakep82
|
posted on 5/1/10 at 05:20 PM |
|
|
someone on here got some, they came in a box of 100. he might still have some left, if i could remember who it was...
MK chippy, thats who!
[Edited on 5/1/10 by blakep82]
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
RichardK
|
posted on 5/1/10 at 05:20 PM |
|
|
Got mine from rallydesign.
Cheers
Rich
Gallery updated 11/01/2011
|
|
mistergrumpy
|
posted on 5/1/10 at 05:30 PM |
|
|
Burton Power advertise them but their's are quite dear. I went to a local supplier and got some but at 8.8 grade and I've been alright.
There seem to be two frames of mind on LCB. There's the people who'll use the same standard bolt as the manufacturer and there's the
people that'll overkill on everything.
Both works (I think actually 8.8 is below grade but like I say I'm still here)
|
|
DAN-MNR-ZX12R
|
posted on 5/1/10 at 05:46 PM |
|
|
There's a place round here called FS Metric who can get any nut, bolt or whatever, with any thread, any length, I dont think there to expensive
either.
Im getting some diff bolts made at some point fo mine.
I'll see if I can get some prices if you want
|
|
big-vee-twin
|
posted on 5/1/10 at 06:19 PM |
|
|
They are M10 x 1.0 thread at a tensile strength of 10.9, 18mm long
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
Thinking about it
|
posted on 5/1/10 at 07:59 PM |
|
|
Got mine from the Ford dealer. Quite expensive though. Four prop bolts and six flywheel bolts came to about £17. I may still have the part numbers if
you get stuck.
|
|
Dingz
|
posted on 5/1/10 at 10:55 PM |
|
|
Sierra ones are ford part no. 6118344 they have the blue nyloc patches on them
were £1.14 each from a main dealer about 2 years ago.
Phoned the local ramblers club today, but the bloke who answered just
went on and on.
|
|
blueskate
|
posted on 5/1/10 at 11:06 PM |
|
|
cheers for the replies i'll take a trip to fords with the part number as it's nearest and see if they have some in stock.
Thanks!
Semper Paratus!
|
|
jonesier1
|
posted on 6/1/10 at 11:32 AM |
|
|
i got 4 for a sierra you can have.
im in my own little world...its ok though they know me there
|
|