luke
|
| posted on 23/1/10 at 07:22 PM |
|
|
crossflow engine - sell or split?
ive got a 1300 crossflow i originally built up for my locost but then changed my mind and went for a zetec.
Ive advertised it on here, and had no interest,so i was going to put it on ebay, but i dont think i would get anywhere near what its cost me so do you
think i should split it and sell it in bits?
Its a 1300 with a 1600GT head, kent BCF2 cam, with variable cog, new timing chain, oil pump, waterpump. Aluminium rocker cover.
Cheers
|
|
|
|
|
GeoffT
|
| posted on 23/1/10 at 07:30 PM |
|
|
I recently got £280 for a standard 1600GT crossflow on ebay - not sure if 1300's are in as much demand, but mine sure got a lot of
interest....
|
|
|
mcerd1
|
| posted on 23/1/10 at 07:33 PM |
|
|
how much are you looking to get for it ?
[Edited on 23/1/10 by mcerd1]
-
|
|
|
luke
|
| posted on 23/1/10 at 07:35 PM |
|
|
its cost me about £320 to build. so i was looking about £250. Its never run!
|
|
|
skodaman
|
| posted on 23/1/10 at 09:37 PM |
|
|
Has it got a lead-free head?
Skodaman
|
|
|
luke
|
| posted on 23/1/10 at 09:53 PM |
|
|
I couldn't say, I never converted it.
I got the head off billholl. He may know but I don't think it is!
|
|
|
marcjagman
|
| posted on 23/1/10 at 10:31 PM |
|
|
Paid £39.99 for my 1.3 with a free gearbox and a log book on ebay. A 1.3 has just sold for £121 with unleaded head.
|
|
|
luke
|
| posted on 24/1/10 at 11:10 AM |
|
|
You see that's why I think I should split it all down. I recon I could get more individually for all the parts.
|
|
|
