tigertom
|
| posted on 24/6/10 at 09:30 AM |
|
|
wanted 200bhp engine
as post says i am lookin for a engine as close to 200bhp as a complete package.mating it to a type 9.going into a tiger cat.taking out a 1.8
pinto.budget of 1500.thnks.
|
|
|
|
|
coozer
|
| posted on 24/6/10 at 09:34 AM |
|
|
Rover T16 210bhp here for £300. All wiring MEMS and ancilleries. Taken from Rover 820 Sport.
Located in DH5 near Durham.
Steve
1972 V8 Jago
1980 Z750
|
|
|
omega0684
|
| posted on 24/6/10 at 10:03 AM |
|
|
STICK WITH THE PINTO!
i have a 2.1 pinto set up for sale calculated/ estimated 170bhp
drop in and go set up looking for £1000-1100
Linky
All the best
[Edited on 24/6/10 by omega0684]
I love Pinto's, even if i did get mine from P&O!
|
|
|
cd.thomson
|
| posted on 24/6/10 at 10:11 AM |
|
|
get a c20xe off ebay and the rest of the bits from yukspeed/bogg bros and youll see plenty of change from £1500
Craig
|
|
|
tigertom
|
| posted on 24/6/10 at 10:36 AM |
|
|
thanks for the offer on the pinto but i want something a bit lighter.would be ok with a vauxhall but i would prefer a complete unit.
[Edited on 24/6/10 by tigertom]
|
|
|
franky
|
| posted on 24/6/10 at 11:47 AM |
|
|
a red top is about the same weight as a pinto!
|
|
|
jossey
|
| posted on 24/6/10 at 01:07 PM |
|
|
bike engine.
all the way.
300 bhp per ton HUmmmmmm
dave
|
|
|
tigertom
|
| posted on 24/6/10 at 02:07 PM |
|
|
bike power is a no no.weight of car doesnt suit unfortunately.duratec,redtop or zetec i think are my preferences in that order.
|
|
|
mrwibble
|
| posted on 24/6/10 at 02:13 PM |
|
|
try dunnell for zetec 2.0? dont know if you'll get a duratec set up and ready to roll with 200bhp for anywhere near 1500...
|
|
|
RK
|
| posted on 24/6/10 at 02:27 PM |
|
|
CA18DET Turbo. JDM they are quite cheap, and you can easily get 200 out of it without any mods, other than the intake and exhaust, which you need to
do anyways to fit to the 7.
|
|
|
Simon
|
| posted on 24/6/10 at 03:39 PM |
|
|
Rover V8 3.9 approx 200bhp:
ATB
Simon
|
|
|
graememk
|
| posted on 24/6/10 at 04:46 PM |
|
|
nissan ca18det mates directly to its original box as well, nice and small.
300bhp with a few mods or 200 out of the box
|
|
|
issunaz
|
| posted on 27/6/10 at 10:13 PM |
|
|
What about the V6 3.0 ltr Ecotec from the Omega.
207 Bhp
200+ lb ft torque.
Martin
|
|
|
