r1_pete
|
| posted on 25/6/10 at 07:21 AM |
|
|
Best place to buy Jenvey TB's
Anyone advise a decent supplier for Jenveys, I've tried Jenvey direct and getting a price for what I need in nigh on impossible:
1st I ask for the price of three TBP45's, they respond with price for three single bodies stating this is what I need for a three cylinder
engine. I respond no its a straight six, then I get the price for two TBP42's and the messege these are right for a 1700 xflow.......
Start again, 3 x TBP45i's please for a 6, quote comes back £775, this includes fuel rail, and 60mm air horns!!! now when did I ask for rails and
horns, all I want is three bare TBP45i's ffs........
They clearly don't listen, or are too busy to deal with retail, so looking for a recommended supplier.
|
|
|
|
|
coozer
|
| posted on 25/6/10 at 07:26 AM |
|
|
What about ATPOWER?
I salivated all over these at Stoneleigh.....
1972 V8 Jago
1980 Z750
|
|
|
balidey
|
| posted on 25/6/10 at 07:39 AM |
|
|
I know someone who has some of these, but not sure he wants to sell all 6*
*yes, I'm taking the P 
Dutch bears have terrible skin due to their clogged paws
|
|
|
r1_pete
|
| posted on 25/6/10 at 07:40 AM |
|
|
They are awesome, just need to work out how to hide a £1000+ all in one spend from SWMBO.
Good job I've left my wallet at home, its buyout from Final Salary pension month this month too
now can I remember the numbers........
|
|
|
irvined
|
| posted on 25/6/10 at 07:53 AM |
|
|
I bought my jenveys from Burton power, price was cheaper than list, and they seemed to know what they were talking about re linkages, fuel rails, and
misc gubbings.
Oh, and just fyi if you are using DCOE ones, the trumpets don't fit inside normal K+N filters, so you need trumpet socks, or a lathe.
[Edited on 25/6/10 by irvined]
http://irvined.blogspot.com
|
|
|
whitestu
|
| posted on 25/6/10 at 08:02 AM |
|
|
quote:
Good job I've left my wallet at home, its buyout from Final Salary pension month this month too
What's all that about then?
Stu
|
|
|
r1_pete
|
| posted on 25/6/10 at 08:10 AM |
|
|
quote:
Originally posted by whitestu
quote:
Good job I've left my wallet at home, its buyout from Final Salary pension month this month too
What's all that about then?
Stu
I get a £dollop extra this month in the pay packet as a sweetner for them closing the FS pension, so, if I can hide it from SWMBO.........
|
|
|
whitestu
|
| posted on 25/6/10 at 08:23 AM |
|
|
Ask for it in cash!
|
|
|
will121
|
| posted on 25/6/10 at 12:36 PM |
|
|
quote:
Originally posted by r1_pete
They are awesome, just need to work out how to hide a £1000+ all in one spend from SWMBO.
Good job I've left my wallet at home, its buyout from Final Salary pension month this month too
now can I remember the numbers........
i know we all like the ease of internet purchase's but if interested in AT ones i would try old school and give them a ring direct and haggle
|
|
|
andy350z
|
| posted on 25/6/10 at 04:30 PM |
|
|
quote:
Originally posted by r1_pete
quote:
Originally posted by whitestu
quote:
Good job I've left my wallet at home, its buyout from Final Salary pension month this month too
What's all that about then?
Stu
I get a £dollop extra this month in the pay packet as a sweetner for them closing the FS pension, so, if I can hide it from SWMBO.........
Do you work for CSC too?
|
|
|
r1_pete
|
| posted on 25/6/10 at 04:42 PM |
|
|
I do Andy Yes, and its next month we get it isn't it, ought to know I've just done dozens of reviews.......
|
|
|
imp paul
|
| posted on 25/6/10 at 06:28 PM |
|
|
pete AT POWER IS LOTS BETTER and are made better also give more power than jenvey also 38mm flows 7% more airflow gives more power than a 45mm jenvey
due to shaftless design had a look at a show very nice parts at a good price 
[Edited on 25/6/10 by imp paul]
|
|
|
andy350z
|
| posted on 25/6/10 at 09:58 PM |
|
|
quote:
Originally posted by r1_pete
I do Andy Yes, and its next month we get it isn't it, ought to know I've just done dozens of reviews.......
yes it will be in July's pay
|
|
|
r1_pete
|
| posted on 26/6/10 at 08:29 AM |
|
|
Thanks for the replies everyone, I'm going to have a last attempt at doing something the locost way with the XJ6 manifold and GSXR750 TBs I
have, if it looks crap, its AT Power.
|
|
|
imp paul
|
| posted on 26/6/10 at 09:32 AM |
|
|
good luck Pete it would be nice if you get it to go the locost way
|
|
|
.JPG)
