Jasongray5
|
posted on 7/7/10 at 03:24 PM |
|
|
Where to get a zetec crank seal?
Hi guys,
In my Fathers infinate wisdom, it was a good idea to take the flywheel side crankseal off to get a trust bearing in the end of the crank?? Stupidly I
listened to him and now i think i would be better off replacing it as a precation?
Question is, do you chaps know where to get one, its a blacktop 1.8 from a mondeo if that helps? I found these guys
Click
But delivery seems expencive and im not sure between the difference of FR and RR crank seals?
Cheers guys!
Jas
How hard can it be?
http://www.flickr.com/photos/33261515@N03/sets/72157611049241239/
|
|
|
big_wasa
|
posted on 7/7/10 at 03:36 PM |
|
|
Burton power for anything Ford or even Ford them selfs.
I would ring them re post if its over the top.
[Edited on 7/7/10 by big_wasa]
|
|
beaver34
|
posted on 7/7/10 at 04:11 PM |
|
|
i can sort you one, email me at work with what you want a proper genuine one aswell
alastair.smith@fordretail.com
|
|
Danozeman
|
posted on 7/7/10 at 05:05 PM |
|
|
Ford dealers carry them iirc and theyr not that expensive. Or burton power but the post will be about 4 quid on a 5 quid seal.
Motor factors stock seals aswell.
I have to say it. What was your dad on? Youd never fit a thrust bearing through a seal hole?
[Edited on 7/7/10 by Danozeman]
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
robocog
|
posted on 7/7/10 at 05:28 PM |
|
|
IIRC one of the seals was 'kin expensive when I bought them from my local Ford stealership and Burtons was waaay cheaper at that time
Can't remember whether it was flywheel or front pulley end that they wanted £50 for though off hand
The trade off is that some of the other stuff I got from the main dealers was way cheaper than anywhere else
It pays to ask and shop around IMHO
Regards
Rob
|
|
Jasongray5
|
posted on 8/7/10 at 09:23 AM |
|
|
cheers guys, yeah seal is about 50 quid from ford
How hard can it be?
http://www.flickr.com/photos/33261515@N03/sets/72157611049241239/
|
|
fatbaldbloke
|
posted on 8/7/10 at 10:36 AM |
|
|
Another vote for Burton Power
|
|