markie t
|
| posted on 16/5/11 at 08:32 PM |
|
|
another diff question
i am currently running a 7" 3.62 open diff with lobro type shafts and have acquired a 3.14 7" diff (47cw 15p) code on diff casing is
83-BG-4025-BE, can anybody tell me what this is from as cant find any similar codes in the sticky for a sierra, also the 3.14 diff has no output
flanges with it, can i use the output flanges from the 3.62 ? or does this mean that this 3.14 diff has push in shafts only and would mean changing
shafts, hubs and brakes to drums ?
|
|
|
|
|
daniel mason
|
| posted on 16/5/11 at 08:39 PM |
|
|
i think the diesel sierra had the 3.14 diff
[Edited on 16/5/11 by daniel mason]
|
|
|
danny keenan
|
| posted on 16/5/11 at 08:44 PM |
|
|
u2u set
cheers danny
|
|
|
gaz05
|
| posted on 16/5/11 at 08:58 PM |
|
|
quote:
Originally posted by daniel mason
i think the diesel sierra had the 3.14 diff
[Edited on 16/5/11 by daniel mason]
Mines from a 1.8TD and it's a 3.62.
|
|
|
daniel mason
|
| posted on 16/5/11 at 09:03 PM |
|
|
if my memory is correct i thnk a 2.3 diesel. not the 1.8td
|
|
|
jacko
|
| posted on 16/5/11 at 09:13 PM |
|
|
 
no2
|
|
|
snapper
|
| posted on 17/5/11 at 04:22 AM |
|
|
You can get a diff rebuilder to fit crown wheel and pinion to the 3.62
You can fit lobros to the 3.14, not easy and needs a little fetling to stop the lobro sined shaft jamming the planet gear shaft.
You can make hybrid push fit to lobro drive shafts using the thicker diesel push in shafts and lobro CV outers
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
mcerd1
|
| posted on 17/5/11 at 07:46 AM |
|
|
quote:
Originally posted by daniel mason
if my memory is correct i thnk a 2.3 diesel. not the 1.8td
spot on
1.8 td = 3.62
2.3 d = 3.92
-
|
|
|
