MEERKAT
|
posted on 1/7/11 at 08:34 PM |
|
|
Aeroscreen / Windscreen
Hi can anyone let me know if I fit an aeroscreen to my Mk Indy will it leave visible holes if I later want to fit a proper windscreen?
Cheers Chris
"To alcohol, the cause and solution to all of life's problems"
- Homer J Simpson
|
|
|
whitestu
|
posted on 1/7/11 at 09:03 PM |
|
|
Depends on the type of aeroscreen.
I had a Mac1 polycarbonate aeroscreen on that bolted through the upright bit on the scuttle and now have a Caterham full screen. None of the holes
from the aeroscreen are visible.
Stu
|
|
MEERKAT
|
posted on 1/7/11 at 09:17 PM |
|
|
Cheers Stu I think I will have to look at one or two other cars to see how to fix the aeroscreen but thanks for the advice.
"To alcohol, the cause and solution to all of life's problems"
- Homer J Simpson
|
|
Davegtst
|
posted on 1/7/11 at 10:44 PM |
|
|
All mine is held on by is the 2 bolts on either end for the mirrors. If i wanted a proper screen later i would still have the mirrors in the same
place and no extra holes.
|
|
stantman67
|
posted on 6/7/11 at 04:11 PM |
|
|
Did the windscreen to aero conversion on a Westy and found there were visible holes (not helped by original poor fitting by original builder. I used a
carbon mods aero, fitted well but wouldn't cover all the holes. Most guys in Westy club who run both make up a quick release alternative
scuttle. Not sure of the fixing points for an MK aero and screen!
|
|