Tris
|
posted on 10/6/14 at 09:01 PM |
|
|
Garage Clearout
Hello All,
Due to immanently moving house, the garage has gone through a major clear out, resulting in a few bits that i would like to offer for sale. All this
is located very close to Junction 13 of the M1, although i am willing to post anything if the buyer pays the cost.
Never used rear upright off a fury - modified to prevent the cracking problem - £10
Westfield Fibreglass rear diffuser for FW bodywork and ST1 and ST3 - New, never used - £65
Ali Catch tank - never been used - £15 - Sold to Chris
This was a weather cover to fit a Fury with a full roll cage - splits in half and fits tightly round the cage - free to anyone who wants it - SOLD
/ GIVEN AWAY
0.750 and 0.625 Wilwood Master Cylinder's - Non Integral - used - £20 for both with bar - Sold
4 inch, 4 jaw chuck for lathe - never used - £25 - SOLD to Ian
3 inch, 3 jaw chuck for lathe - never used - £20 - SOLD to Ian
Electric starter motor - no clue whats its off but was going to use it for an electric reverse - £10
Two part prop shaft for a fury - Freelander fittings one end, Honda CBR the other. £35
Silencer - only used once or twice as it was a little on the loud side ! - Stainless - £40
Any questions please feel free to ask
Cheers
Tris
[Edited on 10/6/14 by Tris]
[Edited on 11/6/14 by Tris]
[Edited on 11/6/14 by Tris]
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
pekwah1
|
posted on 10/6/14 at 09:07 PM |
|
|
Can I have the weather gear please!
|
|
Tris
|
posted on 10/6/14 at 09:10 PM |
|
|
Yes sure - U2U me regards if you want to post or collect.
Cheers
Tris
|
|
IainL
|
posted on 10/6/14 at 09:16 PM |
|
|
Tris
How big is the catch tank?
Cheers
Iain
|
|
Tris
|
posted on 10/6/14 at 09:21 PM |
|
|
Hello Iain,
Taken from the receipt email -
2 Litre rectangular bulkhead mounted oil catch tank.
Twin 1/2” inlets,1/2” breather outlet, drain plug and sight tube, comes with clear pipe. 200 x 155 x 70mm
Cheers
Tris
[Edited on 10/6/14 by Tris]
|
|
gavin174
|
posted on 11/6/14 at 03:39 AM |
|
|
master cylinders and bias bar please..
let me know how you want payment.
thanks Gavin
http://www.essexkitcarclub.com
|
|
RedAvon
|
posted on 11/6/14 at 06:52 AM |
|
|
Hi Tris,
Could I have first dibs on the 2 lathe chucks please, pending more details as I need to make sure they will fit my lathe?
Have you got the spec for the fitment, thread size etc please? If you have the manual/spec You can email it to me and I'll check.
Cheers
Ian
Bricoleur
|
|
Tris
|
posted on 11/6/14 at 07:56 AM |
|
|
Ian and Gavin - you have U2U's
|
|
cfc999
|
posted on 11/6/14 at 08:10 AM |
|
|
will have the catch tank if its still available.
cheers
chris
u2u sent
|
|
loggyboy
|
posted on 11/6/14 at 08:14 AM |
|
|
Will you post the diffuser?
Can you give me the dimensions also?
Thanks.
Mistral Motorsport
|
|
RedAvon
|
posted on 11/6/14 at 08:18 AM |
|
|
Tris
I've replied to u2u thanks to say I'll have the chucks. Have to go to work but back on the forum around 6pm.
Cheers
Ian
Bricoleur
|
|
Tris
|
posted on 11/6/14 at 10:33 AM |
|
|
Loggyboy - yes to posting - its 230mm wide - 880mm long
|
|
loggyboy
|
posted on 11/6/14 at 12:37 PM |
|
|
quote: Originally posted by Tris
Loggyboy - yes to posting - its 230mm wide - 880mm long
Thanks, will have a measure up and get back to you.
Mistral Motorsport
|
|
Phil_neast
|
posted on 11/6/14 at 05:37 PM |
|
|
Hi,
can I buy the diffuser please. I would need it mailed but happy to cover all costs.
Kind Regards
Phil.
|
|
Tris
|
posted on 11/6/14 at 07:57 PM |
|
|
Hello Phil - U2U sent
|
|
msisleman
|
posted on 11/6/14 at 08:48 PM |
|
|
Is the starter motor a reduction geared down one (slower speed, higher torque to suit reverse solution)?
Thanks,
Craig.
|
|
mazie
|
posted on 11/6/14 at 08:58 PM |
|
|
Many thanks Biz for the thought but that's a later upright than I need :-( got all excited too
|
|