Photo Archive
Building: It is an ex-Locost - it has gone to the IOW!
posted on 19/11/18 at 08:38 PM
More Binky! (well, sort-of)
Not a normal episode - and, as far as I'm concerned, a severe case of lathe abuse! I appreciate their skills in many things, but their
machining speeds were all wrong...
I haven't watched the video fully yet but I don't think that is a standard ML7 electric motor. It looks much bigger than mine and they
are giving it a hot supper allright.
I have an ML7 and its so useful but with its relatively low top speed (600 ripems) and lack of power I have found that I can't get right surface
speeds for Carbide insert tools especially. The chip load is just too high for the little thing. Taking tiny little cuts things take soooooooooooo
long to do. I've been spoilt having used lathes in the past though.
quote:Originally posted by JC
I know nothing about lathing but have always wanted to have a go so found it really interesting.
I presume the squeals of protest where because the lathe was too fast from the comments above!!!
I worked in a machine shop 25 years ago and used mills and lathes. No formal training, just what fellow employees passed on to me and a bit of trial
and error. I'd love to have a lathe (and mill) myself now, but space just doesn't permit unfortunately. I'm sure there's a
lot of learning to be done regarding work piece materials, tool types, travel speeds, setups and so on. I'm also sure I'd learn most of
it through trial and error as well.
Photo Archive
Building: Dax Rush - very, very slowly....
posted on 21/11/18 at 04:29 PM
quote:Originally posted by liam.mccaffrey
I have an ML7 and its so useful but with its relatively low top speed (600 ripems) and lack of power I have found that I can't get right surface
speeds for Carbide insert tools especially. The chip load is just too high for the little thing. Taking tiny little cuts things take soooooooooooo
long to do. I've been spoilt having used lathes in the past though.
I did think it was working very hard for an ML7
I've occasionally messed up and let the fire out of the metal with carbide tools my Hemberg, but its a much more solid old machine that can get
to 2200rpm...
I prefer the Raglan LittleJohn MK2 to the ML7. Continuously mechanically variable speed between 50 and a little over 2000 rpm and can be varied
without stopping to change pullies.
and goes zoom)
.jpg)
