blakep82
|
posted on 4/10/08 at 05:31 PM |
|
|
anyone got a type 9 gearbox mount?
bought a gearbox mount/crossmember from SHP, but it doesn't fit
they race with a rocket box, i'm using type 9, so it was expected I suppose. it doesn't quite line up.. not far out right enough
Will need to make my own cross member i think. it just so happens the type 9 box mount passed directly through the centre of the cross member, so
should be pretty starightforward. i hope.
if no one's got one to sell me, photos will be good enough for now
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
andyw7de
|
posted on 4/10/08 at 07:40 PM |
|
|
Think Ive got one in garage, Ill have a look and let you know
cheers
Andy
|
|
blakep82
|
posted on 4/10/08 at 07:41 PM |
|
|
nice one!
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
caber
|
posted on 4/10/08 at 08:41 PM |
|
|
I got mine from Westfield at a surprisingly reasonable price!
Caber
|
|
blakep82
|
posted on 8/10/08 at 08:02 PM |
|
|
what if i was to use a piece of threded studding, with a peice of nylon in the middle?
on a cotton reel bush for example, does the threaded part run all the way through, or are they seperate in the middle?
or where could i get a cotton reel bush with the same thread for the threaded hole on the gearbox?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|