Board logo

R! AIS (2003) - WTB
JoaoCaldeira - 1/12/09 at 06:59 PM

Hi all.

I need the metal tubes that go from the AIS to the under exhaust ports.



I know most of us just ditch it. I'm really needing it for PT legalization issues.

Shipping will be either to Edimburgh or London.

Thanks in advance,
Joao

PS: Thanks robcollingridge.com for the photo

speed8 - 2/12/09 at 04:38 AM

I might still have them lying around in my garage but I can't check for a couple of weeks.

PM me around 16/17 Dec if you're still after some and I'll take a look for you.

JoaoCaldeira - 2/12/09 at 09:46 AM

Hi.

Thanks!

I'll PM you mid December.

Meanwhile, if anyone else is able to confirm that has one , I'd appreciate.

Regards,
Joao

bassett - 2/12/09 at 03:05 PM

If i havent thrown them out il have a complete ais setup excluding EXUP in the garage.

r1_manx - 6/12/09 at 03:03 PM

while this thread is on the subject, I want to do away with the AIS and piping on my R1 mini. How do other people generally go about this, just plug the holes in the outlets from the head? Any advice would be great thanks.

Ben

JoaoCaldeira - 10/12/09 at 01:17 PM

quote:
Originally posted by r1_manx
How do other people generally go about this, just plug the holes in the outlets from the head?


Just ditch the AIS and plug the inlets... there usually are quite a few inexpensive kits on eBay for plugging'em...

I'll need the AIS for portuguese legalization only... I've been running without AIS

Regards,
Joao

JoaoCaldeira - 21/12/09 at 12:14 PM

Hi again!

Any chance anyone still has the metal AIS tubes?

I really need 'em....

Cheers,
Joao

JoaoCaldeira - 5/3/10 at 09:25 PM

Bump!

I still need these... so if anyone has one ... please!

Regards,
Joćo

JoaoCaldeira - 28/4/10 at 04:56 PM

Still no luck, so... bump?