Are there companies who would shorten the omega prop and replace the end with the ford flange? What kind of costs am I looking at for this? (Hopefully less than the £350 I was quoted for a fully adjustable custom made item)
Good afternoon! Who have you guys used to manufacture b*stard propshafts? I (still speculatively) am interested in getting an omega box attached to a
sierra LSD. I have a pinto prop already which has the correct end to bolt up to the LSD and I should be able to get hold of the complete omega shaft
when i get the gearbox.
Are there companies who would shorten the omega prop and replace the end with the ford flange? What kind of costs am I looking at for this? (Hopefully
less than the £350 I was quoted for a fully adjustable custom made item)
Could try Autoprop in Felbridge.
They modified my prop and do lots of others.
Dunning & Fairbank
Autoprop
Recoprop
cheers guys
I used
www.jwtransmissions.co.uk
to make a new prop from scratch for my BEC. Good price and service (IIRC D&F are expensive)
prices anyone?
I'm interested in this too as my bmw item is a 2-piece and will obviuosly cost twice as much to shorten.
I have just had my Yamaha/Sierra propshaft remodelled/rebuilt - £150 inc VAT at the Propshaft Clinic.
LINKY
HTH
Neil
Wilson Drive Shafts - Bulwell, Nottingham are near to you?
http://wilsondriveshafts.co.uk/content/view/14/33/
quote:
Originally posted by slimtater
Wilson Drive Shafts - Bulwell, Nottingham are near to you?
http://wilsondriveshafts.co.uk/content/view/14/33/
neil at 105speed 
yes, he is an ford/anglia specialist he's just done me a brand new made to measure prop from type 9 box to english axle
£140 delivered plus it was a very quick turnaround. your's may well be a different price because of the yoke/flange but well worth a phone call
imo. tell him i sent you - 01234826827