Board logo

4A-GE 20v cam belt
martinnitram - 10/10/17 at 09:10 AM

Trying to track down a cam belt for my 20v silvertop without much luck

Where is everyone getting their cam belts from, without sending off to America.

The belt on mine is approx. 17mm wide and has 111 teeth

Tried jap car specialists but they all want a reg number

Thanks

voucht - 10/10/17 at 10:28 AM

Have you tried Quinton Hazell ?

Angel Acevedo - 10/10/17 at 06:26 PM

quote:
Originally posted by martinnitram
Trying to track down a cam belt for my 20v silvertop without much luck

Where is everyone getting their cam belts from, without sending off to America.

The belt on mine is approx. 17mm wide and has 111 teeth

Tried jap car specialists but they all want a reg number

Thanks


Look for Cogged Belt, 5/8 X 115 teeth...
You should find several options.
5/8" is about 16 mm so should be close enough.

Angel Acevedo - 10/10/17 at 06:38 PM

Further digging shows this should be what you are loooking for...
No connection to me whatsoever...
https://www.gprindustrial.com/en/2132-bx-v-belts/2332-BX115-cogged-belt.html

obfripper - 10/10/17 at 06:55 PM

Gates 5124 from local factors, eurocarparts or ebay should do the trick or 13568-19035 from your toyota dealer if they're friendly enough.

Dave

martinnitram - 10/10/17 at 09:38 PM

quote:
Originally posted by obfripper
Gates 5124 from local factors, eurocarparts or ebay should do the trick or 13568-19035 from your toyota dealer if they're friendly enough.

Dave


That's the one, Gates 5124, 111 teeth

martinnitram - 11/10/17 at 08:04 AM

Don't suppose you know the number for the tensioner roller do you ? ;-)

obfripper - 11/10/17 at 08:24 AM

The tensioner is 13505-16021, it's the same as 16v 4age models.

Dave

Worzey - 11/10/17 at 07:10 PM

Have you tried FenSport? I'm sure that's where I got mine from when my engine was rebuilt.

https://www.fensport.co.uk/

martinnitram - 11/10/17 at 09:32 PM

quote:
Originally posted by obfripper
The tensioner is 13505-16021, it's the same as 16v 4age models.

Dave


Ill have a look for one.
Thankyou

martinnitram - 11/10/17 at 09:35 PM

quote:
Originally posted by Worzey
Have you tried FenSport? I'm sure that's where I got mine from when my engine was rebuilt.

https://www.fensport.co.uk/


No never heard of them, and they didn't come up when ive been searching, see they are involved in 4A-GE parts, so a useful link to have.

Thanks for that.