In assembling the gearbox to the engine, I was wondering what is the best way to lubricate the clutch splines & pilot bearing.. What type of
grease is recommended, if any?
any opinions greatly received!
I use spline grease. But if I have none close by, I use a tiny smear of copper grease.
Moly grease
you'll get several different answers they're as every one has their favourite What ever you use wipe most of it off, only a little is
needed.
The most common one seems to be copper grease.
[Edited on 29/4/08 by Mr Whippy]
i got a small pouch of grease with my new valeo clutch. its specifically used for the splines
Copper grease for me - just enough to colour the splines though.