minitici
|
| posted on 22/1/09 at 09:41 PM |
|
|
I once had a Mini Pick-up, after I had welded in new panels, I realised I really only bought a roof  Nearly every other panel was replaced or
patched....
My 1993 Italian Job needs a good few panels before it gets back on the road (I bought it new and has only done 45K miles).
|
|
|
|
|
clanger
|
| posted on 22/1/09 at 09:44 PM |
|
|
quote:
Originally posted by Omni
Then there were 3 
Nice on Clanger 
I am doing a RWD with Fireblade Engine.
How you going to do your RWD Clanger?
Going to try and get an IRS setup jammed in there similar to that one MAC did for one of the members on here?
Probably with a Freelander diff.
Did look at a Z-cars setup but way toooo much dough by my reckoning.
Going to aim for an IVA / SVA or whatever it is these days or future, just for piece of mind, possible resale / insurance woes and to keep the red
tape beuracrats happy. 
Here's my progress so far:
ZX12R Mini
Got to get rid of all that rust first though
[Edited on 23/1/09 by clanger]
[Edited on 23/1/09 by clanger]
|
|
|
Omni
|
| posted on 23/1/09 at 11:40 AM |
|
|
Clanger,
I thought I recognised your Mini from somewhere I am on the Mini Forum too and I am already subscribed to that thread
I have the same idea basically. You are talking about Chis Jessop's Mini
Are you going to make the rear up as you go or do you have an idea? I am aiming for the same thing so maybe it is something we could work on together?
Plans I mean 
O
|
|
|
Stuart_B
|
| posted on 23/1/09 at 01:54 PM |
|
|
i am on the mini froum aswell, and the 16vmini froum and colchester mini club froum.
stuart
|
|
|
clanger
|
| posted on 23/1/09 at 05:39 PM |
|
|
quote:
Originally posted by Omni
Clanger,
I thought I recognised your Mini from somewhere I am on the Mini Forum too and I am already subscribed to that thread
I have the same idea basically. You are talking about Chis Jessop's Mini
Are you going to make the rear up as you go or do you have an idea? I am aiming for the same thing so maybe it is something we could work on together?
Plans I mean
O
I'm not going to "re-invent the wheel" as far as the IRS goes, but just adapt the book design to fit inside the mini rear end. Am
going to try and avoid cutting half the rear of the car off as per Z-cars design though. 
|
|
|
.jpg)
