blitzmk2
|
posted on 25/1/09 at 03:45 PM |
|
|
Bike carb to manifold hose.
I am about to fit zx6r Carbs to my crossflow, but I am having trouble finding suitable tube. It needs to be 41/42mm I.D. and fuel resistant. I know
that fuel resistant silicone is available, but it only comes in Metre lengths for £80 + post and packing and I only need less than a third of that,
any ideas please?
|
|
|
blitzmk2
|
posted on 25/1/09 at 03:49 PM |
|
|
Sorry, just noticed the previous thread on this, but I don't want connectors with a flange, I just need 4 short pieces of hose.
|
|
lotusmadandy
|
posted on 25/1/09 at 04:19 PM |
|
|
I bought 2 short silcone
hose joiners from a company called
zena racing on ebay,they are 3" long
i cut them in half to make two joiners.They cost £3
each and have now been on the car
for a year with no deterioration,
just discoloured a little inside.
Andy
|
|
myke pocock
|
posted on 25/1/09 at 04:30 PM |
|
|
I got a metre length of 40mm ID silicone hose off ebay for £20. The company said that silicone for fuel systems, carbs etc is available but very
expensive. Standard hose like I have will eventually break down but at £20 for 1 metre you can change it regularly. I only used 6" of the stuff
for my bike carbs on my trials Estelle so still loads to go at!!!.
|
|
bracey
|
posted on 25/1/09 at 05:46 PM |
|
|
boggs will do it at a fiver per hose +p+p thats what charged me when fitted r1s to there manifold
cheers
rich
|
|
Danozeman
|
posted on 25/1/09 at 08:06 PM |
|
|
Get the connectors off the bike. They go on the bay for a fiver for 4.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
flibble
|
posted on 25/1/09 at 08:44 PM |
|
|
I've used the zena racing stuff off EBay as was mentioned earlier, been working for a year or two with no problems as yet.
Cant find them at the moment but similar here:
http://cgi.ebay.co.uk/40mm-1-5-8-Silicone-1-Metre-Straight-Hose-Silicon-Blue_W0QQitemZ250324350806QQihZ015QQcategoryZ72205QQtcZphotoQQcmdZViewItemQQ_t
rksidZp1742.m153.l1262
[Edited on 25/1/09 by flibble]
|
|
DarrenW
|
posted on 25/1/09 at 09:25 PM |
|
|
Ive used alfagomma hose. Worked very ell and not expensive. Ive since sold the surplus to 2 other LCB members.
If you do a search under my username you should find the spec.
|
|
blitzmk2
|
posted on 26/1/09 at 09:41 PM |
|
|
Alfgomma Hose
Darren, I have read all your very interesting threads, but you don't say where you bought the hose. I Googled it and the only supplier I could
find would only supply 30 Metres, which is slightly more than I need....Baz.
|
|
DarrenW
|
posted on 27/1/09 at 09:32 AM |
|
|
Mine came from a local stockists in Bishop Auckland called Snowball's. They are one of those Alladins cave type places. I got a 1m length for
about £15. i didnt go in specifically to buy that hose, i just explained what i needed and they offered it. They didnt however offer it as a
specifically fuel resistant type, but it works and ive heard others comment on them using it too.
|
|