Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: boot cover
thebull

posted on 30/7/09 at 01:27 PM Reply With Quote
boot cover

can anyone tell me the best place to buy abs plastic or the best stuff to make a boot cover from.

thanks
graham

View User's Profile View All Posts By User U2U Member
smart51

posted on 30/7/09 at 01:35 PM Reply With Quote
Mine was made from carbon effect ABS supplied by MNR. CBS and Europa sell it the last time I looked.

I found that the edges of mine gradually curled up over time. Something more rigid would be better for a boot lid.






View User's Profile View All Posts By User U2U Member
whitestu

posted on 30/7/09 at 01:48 PM Reply With Quote
I made mine from ply wood covered with vinyl. It's cheap and easy to work with, and so far fairly robust.

Stu

View User's Profile View All Posts By User U2U Member
Flamez

posted on 30/7/09 at 01:55 PM Reply With Quote
got mine from here , they even cut to size. unfortunately the postage cost more than the plastic.

3mm abs used for firewall, tunnel top and boot cover.





my build mac1motorsports

View User's Profile View All Posts By User U2U Member
Slater

posted on 30/7/09 at 02:00 PM Reply With Quote
My boot cover is 6mm ABS, but I find it expands and warps alot in the sun. So I will be converting over to plywood very soon.





Why do they call Port Harcourt "The Garden City"?...... Becauase they can't spell Stramash.

View User's Profile View All Posts By User U2U Member
pewe

posted on 30/7/09 at 02:03 PM Reply With Quote
Thin marine or exterior ply covered with thin ali. glued in place did it for me.
Looks passable espec. if you use edge trim around the perimeter, is fairly weather-proof and screws onto the outer tubing.
Only tricky bits were trying to shape it around the roll-over bar so ended up making card patterns first then four pieces which fit together using tongues and brackets on the under-side.
Also made a hatch with Moss Plastics surface hinges and secured with Dzus fasteners so I can put helmet, her shopping etc. in the boot.
HTH.
Cheers, Pewe

View User's Profile View All Posts By User U2U Member
thebull

posted on 30/7/09 at 03:14 PM Reply With Quote
thanks for your replies chaps
View User's Profile View All Posts By User U2U Member
jase380

posted on 30/7/09 at 03:32 PM Reply With Quote
6mm mdf covered in vinyl on mine, no probs so far !
View User's Profile View All Posts By User U2U Member
Richard Quinn

posted on 30/7/09 at 03:59 PM Reply With Quote
quote:
Originally posted by Flamez
3mm abs used for firewall

Now there's a contradiction

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.