Danozeman
|
| posted on 18/8/09 at 11:47 AM |
|
|
Windscreen rubber
What rubber do i need to go between the bottom screen to the scuttle?
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
|
|
Mr Whippy
|
| posted on 18/8/09 at 11:53 AM |
|
|
the top one is quite good for this
linky
Fame is when your old car is plastered all over the internet
|
|
|
whitestu
|
| posted on 18/8/09 at 11:58 AM |
|
|
Does the screen have a channel at the bottom? If so you need T trim for it - this is on the woolies site:
Description:
T' Section. Usually to seal between bottom of screen and scuttle. Overall length 35mm (1 7/16" . Head of 'T' is 8mm
(5/16".
|
|
|
philhoward
|
| posted on 18/8/09 at 12:26 PM |
|
|
Also try Seals + Direct Ltd
|
|
|
Bluemoon
|
| posted on 18/8/09 at 12:43 PM |
|
|
Measure the T slot in the screen first (if you have one)... The stuff I got was an utter pain to get in to the slot could have done with a smaller
one, it took all day with two of use pulling the sod though (even with washing up liquid)!
Dan
[Edited on 18/8/09 by Bluemoon]
|
|
|
Mr Whippy
|
| posted on 18/8/09 at 01:01 PM |
|
|
quote:
Originally posted by philhoward
Also try Seals + Direct Ltd
god there's tonnes on that site!  cheers
Fame is when your old car is plastered all over the internet
|
|
|
Danozeman
|
| posted on 18/8/09 at 04:31 PM |
|
|
Theres no channel on the bottom. The one whippy says is perfect. Cheers lads.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
Danozeman
|
| posted on 18/8/09 at 04:33 PM |
|
|
Actuall no whippys is to small, that goes onto 6mm, The channel is about 15. But thats the style i want.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
