carlknight1982
|
posted on 31/5/11 at 03:40 PM |
|
|
Electric speedo sensor type 9
Im not sure if this is in the right place, ive treated myself to a digital dash but i dont fancy the magnet form of speedo pickup, i was wondering if
there is something that fits the type 9 that can be used with an acewell digi dash.
anythoughts?
Logic will get you from a A to B
Imagination will take you everywhere.
|
|
|
Charlie_Zetec
|
posted on 31/5/11 at 04:14 PM |
|
|
I'm not sure if the two can be combined - I'm sure someone will be along to tell you shortly. I do know people have used electric speedo
outputs from a Type 9 gearbox, and Burton make the sensors to suit; the only bit I'm not sure about is if the two are directly compatible.
But, I do have an electronic gearbox unit from Burton, as well as the Type 9 adaptor that I was going to use before change of plan. If interested,
and if it will work, drop me a U2U and I'll see if a) I can find them, and b) how much I'd like for them! Both are new and unused, still
in packaging, and can provide receipt.
Think they are these ones;
Electronic Speedo Sensor and the
Type 9 Adaptor
Good luck with the information hunting, and let me know if the parts are of any use.
[Edited on 31/5/11 by Charlie_Zetec]
Artificial intelligence is no match for natural stupidity!
|
|
blakep82
|
posted on 31/5/11 at 04:36 PM |
|
|
the burtons sensor will give out a certain number of pulses for every rotation of the prop shaft, as long as you can set up on your dash how many
turns of the propshaft (or rather pulses from the sensor) equals whatever distance it needs to know, then you should be fine
thats a terrible explaination, but for example, my speedo needs to know how many pulses the sensor gives out per kilometer. if yours needs the same
sort of info input, then the burton one should do fine
more info on how my gauge works here
http://www.caigauge.com/page28.html
the calculations on yours should be similar.
[Edited on 31/5/11 by blakep82]
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
Hector.Brocklebank
|
posted on 31/5/11 at 04:42 PM |
|
|
Hi
These Guys Can do exactly what your looking
for in one hit
|
|
Humbug
|
posted on 31/5/11 at 05:05 PM |
|
|
David Jenkins made a sender himself - see here
|
|
Xtreme Kermit
|
posted on 31/5/11 at 05:06 PM |
|
|
quote: Originally posted by Charlie_Zetec
I'm not sure if the two can be combined - I'm sure someone will be along to tell you shortly. I do know people have used electric speedo
outputs from a Type 9 gearbox, and Burton make the sensors to suit; the only bit I'm not sure about is if the two are directly compatible.
But, I do have an electronic gearbox unit from Burton, as well as the Type 9 adaptor that I was going to use before change of plan. If interested,
and if it will work, drop me a U2U and I'll see if a) I can find them, and b) how much I'd like for them! Both are new and unused, still
in packaging, and can provide receipt.
Think they are these ones;
Electronic Speedo Sensor and the
Type 9 Adaptor
Good luck with the information hunting, and let me know if the parts are of any use.
[Edited on 31/5/11 by Charlie_Zetec]
Don't know about the acewell, but my etb speedo works a treat with this set up.
|
|
avagolen
|
posted on 31/5/11 at 05:16 PM |
|
|
Hi These are pictures of the Ford Sensor used in the EFI installations.
The sensor requires a different cable drive gear fitting in the box.
It has a different end that engages the sensor drive.
The original installation has a tab on the gearbox to locate the sensor.
As my box did not have the correct structure, I made my own.
The sensor seals with an 'O' ring on it's circumference.
It mounts on the oposite side of the gearbox to the cable drive and gives
5 pulses for 2 rotations of the output shaft.
![](/galpreviews/Sensor_1.jpg) ![Speedo_sensor_1](/gallery/Sensor_1.jpg) Speedo_sensor_1
![](/galpreviews/sensor_2.jpg) ![Speedo_sensor_2](/gallery/sensor_2.jpg) Speedo_sensor_2
Len.
The Answer for everything, but never the last word....
|
|
prelude1980
|
posted on 31/5/11 at 05:25 PM |
|
|
Hi,
I did exactly like your wanting, I used the electric sender from Burton Power but needed to make a small circuit to let the Acewell work with it, I
found it much much better than the magnets and it's not missed a beat.
See my thread from ages ago
Linky
About 3/4 way down the page is the circuit i needed to build
Let me know if you need any more help
Speed has never killed anyone. Suddenly becoming stationary... that's what
gets you.
https://www.topcashback.co.uk/ref/dodd1980
|
|
David Jenkins
|
posted on 31/5/11 at 05:38 PM |
|
|
quote: Originally posted by avagolen
Hi These are pictures of the Ford Sensor used in the EFI installations.
I've been trying to find one of those senders for ages.
I have a nice late-model Type 9 that uses that kind of sender sitting on my garage floor. It could be fitted to my car if I had one of those...
|
|
pekwah1
|
posted on 31/5/11 at 06:14 PM |
|
|
why don't you like the magnet senders?
i've just bought an acewell dash too, and i've just installed the magnet sender that came with it, works brilliantly!
Very quick pickup and refreshes quicker than you will notice, also very easy to install!
|
|
Stott
|
posted on 31/5/11 at 08:44 PM |
|
|
Don't bother, or if you really want to, go to work, turn up an adaptor out of ali, then cut a hole in your tunnel, go around scrap yards to find
the ford sensor, source an appropriate sized circlip, fit it, wire it to the acewell, spend all day trying to faff around with it getting it to work
then read the instructions, which say something like "you can use any electronic speed sensor as long as it's exactly like ours - any
other sensors will need specialist set up and or complete redesign of the pick up circuit - for these applications you may as welll not bother buying
our speedo"
Then drill your prop flange and fit the supplied magent and pickup and get it working in 10 mins.................................
|
|
russbost
|
posted on 31/5/11 at 09:00 PM |
|
|
If it's a 3251, 3252, or 4xxx, or 7xxx series it will work with most OEM gearbox sensors, the lesser (& cheaper!) Acewells have a slower
processor which will only work at lower frequencies - more info on my website www.furoreproducts.co.uk just look thro' the FAQ's
However the standard setup with magnet works absolutely perfectly, it's all I ever use on the cars I build & never had any issues with
calibration at IVA, the speedo works steadily from about 2-3mph upwards.
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Stott
|
posted on 1/6/11 at 06:07 PM |
|
|
It's a 3252 iirc, I bought it at stoneleigh, it was sold to me as having a faster processor allowing an oem sensor to just be connected up to
it. In fact I was told all I would need was an adaptor to fit the sensor to a type 9, and was even pointed in the direction of the etb stand to
get said item (which I didn't bother buying luckily)
It may have a faster processor but it still won't work without additional circuitry to modify the output of the sensor to suit the acewell, hey
ho, like you said the magnet works well and it does look nice in black...................
|
|