cosmicicecreamman
|
posted on 11/8/16 at 10:28 PM |
|
|
1800cc Ford Zetec, Stanwood Performance Engine, Weber 40 DCOEs, 750MC, DTA ECU
1800cc Ford Silvertop Zetec engine, crate engine, blueprinted and fully re-built in 2008 by Stanwood Performance Engines, fitted with uprated control
cam for the 750MC Sport Specials Kit Car Championship, and rolling road tuned (dyno sheet available). Engine was rolled forwards to reduce centre of
gravity in my Riot and has heavily modified sump and inlet manifold. Engine runs control weber 40 DCOEs with under-slung throttle linkage and ITG
filter. Bespoke Tony Law 4 branch Exhaust manifold. DTA E48 ECU (just been sent off to DTA for a health check).
Engine, and car, was used by previous owner in 750MC, and by myself for track days, and local Scottish championships. Very reliable engine and done
around 100hrs. I've always ran the engine on Mobil oil. As its out I would recommend changing the timing belt - just to be on the safe side!!
The engine has been removed but I made videos of the engine starting and running which I can email along with the dyno sheet.
Looking for £1,000 ONO
Engine is located in Aberdeenshire, Scotland.
[Edited on 11/8/16 by cosmicicecreamman]
[Edited on 11/8/16 by cosmicicecreamman]
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
sam919
|
posted on 14/8/16 at 07:42 PM |
|
|
Hi, have you an email address to contact you on, I can't seem to U2 you?
Regards
|
|
cosmicicecreamman
|
posted on 15/8/16 at 07:21 AM |
|
|
U2U sent with email address.
|
|
cosmicicecreamman
|
posted on 16/8/16 at 07:02 PM |
|
|
There's been a few questions about power - It produced 169.4bhp at fly and 145.8ft-lb torque when dyno'd in 2008.
|
|
Locost_col
|
posted on 28/8/16 at 10:11 PM |
|
|
Any pics
|
|
OwenSP
|
posted on 3/9/16 at 09:42 AM |
|
|
Is this available? Would be interested to have some further info please
|
|
kriswilson
|
posted on 3/9/16 at 06:35 PM |
|
|
I'm just north of Aberdeen. Interested to see if its still available also.
|
|
cosmicicecreamman
|
posted on 4/9/16 at 08:39 PM |
|
|
It's provisionally sold - if the deal falls through I'll update the post
Thanks
Stephen
|
|