welshboy
|
| posted on 18/1/08 at 08:20 PM |
|
|
steering joint
could any one tell me what other steering joint will fit on a mark 1-2 escort steering rack please the ecsort 1 i have seem very close to fu tube
|
|
|
|
|
TGR-ECOSSE
|
| posted on 19/1/08 at 02:24 AM |
|
|
How close is it to the fu tube? I thought mine was close till i looked at some other cars and they were the same.
Ronnie
|
|
|
t.j.
|
| posted on 19/1/08 at 08:29 AM |
|
|
I use the Cortina MK5(=Taunus Mk3) joint on the rack as the sierra one didn't fit. Then the rest is from the Sierra.
The ball-joint left and right are the sierra ones (M14). Maybe someone know if they are the same as the cortina/escort ones.
[Edited on 19/1/08 by t.j.]
Please feel free to correct my bad English, i'm still learning. Your Dutch is awfull! :-)
|
|
|
Mark Allanson
|
| posted on 19/1/08 at 11:49 AM |
|
|
Manual steer sierra will fit, but power steer will not.
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
welshboy
|
| posted on 19/1/08 at 05:56 PM |
|
|
thats great info i will try a sierra one then i had tryed the power steering one and it would not fit so i will go for the non power steering thanks
everyone
|
|
|
Mark Allanson
|
| posted on 19/1/08 at 06:23 PM |
|
|
The down side is that the non power sierra one has a cast section and the power has MS tube which is ideal for welding. I drilled out the rivets and
replaced with 8.8 M6 bolts so I unded up with the power down shaft and the non power clamp on the steering rack.
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
t.j.
|
| posted on 19/1/08 at 07:00 PM |
|
|
hmmm, strange my 1989 sierra shaft didn't fit on the steering rack of the Mk2 escort. And the sierra didn't have power steer.
Are there different types then?
Please feel free to correct my bad English, i'm still learning. Your Dutch is awfull! :-)
|
|
|
