Board logo

zetec blacktop loom plugs
gavin174 - 15/5/11 at 09:12 PM

Hi all

I collected a 2.0 blacktop yesterday and there are a couple of the plugs missing from the loom

can anybody help

thanks Gavin

RichardK - 15/5/11 at 10:45 PM

Ford oval coil pack connector Canem Megajolt Megasquirt | eBay UK

I didn't use the grey thing as I didn't know what it was so binned it!!

Cheers

Rich

austin man - 15/5/11 at 10:46 PM

I think the grey one is some kind of supressor for the coil pack

RichardK - 15/5/11 at 10:52 PM

No sure why the rubber sealing ring is on to of the thermostat housing, hope fully there is one inside it and the head!!

Take care of it, its about a £5 for that seal alone.

Cheers

Rich

gavin174 - 16/5/11 at 07:34 AM

quote:
Originally posted by RichardK
No sure why the rubber sealing ring is on to of the thermostat housing, hope fully there is one inside it and the head!!

Take care of it, its about a £5 for that seal alone.

Cheers

Rich


thanks Rich

I removed the thermostat housing to get to the bell housing bolts easier..

left the gasket there so I dont forget to get a new one

stevebubs - 16/5/11 at 08:37 AM

quote:
Originally posted by gavin174
quote:
Originally posted by RichardK
No sure why the rubber sealing ring is on to of the thermostat housing, hope fully there is one inside it and the head!!

Take care of it, its about a £5 for that seal alone.

Cheers

Rich


thanks Rich

I removed the thermostat housing to get to the bell housing bolts easier..

left the gasket there so I dont forget to get a new one


Check your sender threads - you may need to fit a silvertop housing to get the threads you require for your senders...

AndyRead - 16/5/11 at 09:56 PM

HI Gavin,

I have got both plugs on a full loom if thats any help?

Andy