Dale
|
| posted on 18/2/15 at 01:17 PM |
|
|
bracing overtop of the engine
Hello
I am in a situation that does not allow for any room for the tube "R" (From the upper suspension mount to the rear of the engine
compartment).
A few years ago on this site I saw someone made a bolt in ring that went around the valve cover and acted like a strut tower. I have been searching
but cant find it.
If anyone can point me towards it I would be greatfull.
Thanks
Dale
Thanks
Dale
my 14 and11 year old boys 22
and 19 now want to drive but have to be 25 before insurance will allow. Finally on the road
|
|
|
|
|
MikeR
|
| posted on 18/2/15 at 04:54 PM |
|
|
I think you're referring to the bloke who put a V6 into a locost - James as i recall. But this was probably 10 years ago.
|
|
|
Dale
|
| posted on 21/2/15 at 05:40 AM |
|
|
I found the posting , it was by Steve Hignett, I have not found a pic of the chassis with the engine in it yet though.
Dale
Thanks
Dale
my 14 and11 year old boys 22
and 19 now want to drive but have to be 25 before insurance will allow. Finally on the road
|
|
|
MikeR
|
| posted on 21/2/15 at 07:23 AM |
|
|
Your post inspired me. I was actually thinking of liam.
Post about his car part way down the following link & then click on the link by him name for his photo archive.
http://www.locostbuilders.co.uk/forum/4/viewthread.php?fid=2&tid=168630
|
|
|
Dale
|
| posted on 21/2/15 at 05:23 PM |
|
|
Yes that is the one. Thanks. The one I found is similar but I think for a bec. I ahace accord Lima 2.3 turbo which should end up good ving me around
250rwh and 300 or so torque. I don't want it to flimsy out fron . Thanks again.
Dale
Thanks
Dale
my 14 and11 year old boys 22
and 19 now want to drive but have to be 25 before insurance will allow. Finally on the road
|
|
|
