Hi
Quick question after watching one of the posts in another section with ref to oil catch tanks

Engine is a 1.6 se running on jenveys if people have fitted an oil catch tank how have they connected it up ?

I have tee ed the connection between cam hose and block hose with the breather left in situ so i have one hose connected at the tank and one open to the air/filter

My theory is the block breather will only blow out at Fords recommended pressure because of the breather and the cams work at normal atmospheric pressure ?

Am i mad or just been building this car for so bloody long im now questioning everything ive done !!

Thanks

Nick M