big_wasa
|
posted on 11/6/15 at 01:41 PM |
|
|
Any more pictures off the plenum please ?
|
|
|
richardm6994
|
posted on 11/6/15 at 01:46 PM |
|
|
I'll put a few on tomorrow........at the moment, a small petrol spillage ruined it's paintwork and so I've not taken any photos
yet.....repainting tonight so will upload the photos as soon as it's done.
|
|
big_wasa
|
posted on 11/6/15 at 02:32 PM |
|
|
Thanks. Looks like you have done a lot of work to it.
|
|
garyt
|
posted on 11/6/15 at 06:43 PM |
|
|
really neat installation , looking and sounding good.
What have you done re your ignition timing and how much boost are you pushing?
Gary
remember we are not mad just creatively insane !!!!!
|
|
richardm6994
|
posted on 11/6/15 at 06:49 PM |
|
|
Thanks Gary.
The car isnt mine, I've just fitted the charger and made the engine intake plenum. When Steven get's the car home, he'll have the
pleasure of plumbing it all in properly and getting the engine tuned.
|
|
richardm6994
|
posted on 11/6/15 at 08:41 PM |
|
|
Ok, here are a few photos of the intake plenum (you can just about see the trumpets I've welded inside.....
|
|
big_wasa
|
posted on 11/6/15 at 09:20 PM |
|
|
Thanks for the pics. One more question if I can ? Did you make or buy the velocity stacks as its somthing I am looking at for a griffin style manifold
?
Cheers
|
|
richardm6994
|
posted on 11/6/15 at 09:25 PM |
|
|
The stacks were bought but I machined down the straight end slightly so that the pushed inside the plenum runners and then a few small welds to secure
them in place.....not that they needed welding as they were a tight fit but better safe as there's no going back once it was all sealed up!!
|
|
big_wasa
|
posted on 11/6/15 at 09:47 PM |
|
|
Any chance you can tell me what there from ? I was thinking dcoe 40.
Thanks again
|
|
Sierra
|
posted on 12/6/15 at 07:22 AM |
|
|
Hi I got the trumpets from here
http://www.rallydesign.co.uk/product_info.php?products_id=3336&osCsid=s2llsmsppdu4jujbim5bmsn514
Hope that helps
|
|