Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Indy GSXR dyno setup
Yellow Peril

posted on 17/4/13 at 12:06 PM Reply With Quote
Indy GSXR dyno setup

Wondering about having my MK Indy setup on a Dyno. It runs well but with a stock set up through a Power Commander module. I think it could be optimised though as it runs fairly rich and is very thirsty when pressing on..

Any suggestions welcomed - I'm on border of Herts and Beds

View User's Profile View All Posts By User U2U Member
motorcycle_mayhem

posted on 17/4/13 at 02:04 PM Reply With Quote
### is very thirsty when pressing on..


That comment is priceless, particularly if the engine is the GSXR1000. Even the NA engine in my road-going car will consume fuel at 1litre/minute when pushed hard.

IF you have no error codes, no electrical gremlins or anything of such similar nonsense then get the car to a Dyno.
My preference is PDQ (Slough), but Powertec (Peterborough) will also do a good job.

View User's Profile View All Posts By User U2U Member
twybrow

posted on 17/4/13 at 02:12 PM Reply With Quote
PDQ in Slough. Brilliant guys who know their bike engines very well, andhave done many a remap for BECs. They found just over 190bhp in my ZX12R powered 7 when I went there...
View User's Profile View All Posts By User U2U Member
Yellow Peril

posted on 17/4/13 at 02:20 PM Reply With Quote
Yeah - realise now that sounds like stating the obvious..

I suppose I meant to say it slurps fuel (1/4 tank = 20 miles..) when doing anything other than just pootling around under very low load. I'm not expecting or even looking for economy but just got me thinking that it's probably not running optimally (is that a word ?).

No technical issues/faults at all. Thanks for the tips - will give them a try.

View User's Profile View All Posts By User U2U Member
motorcycle_mayhem

posted on 17/4/13 at 03:56 PM Reply With Quote
Anything around 1 litre/min for these engines isn't excessive. A good track day will empty two 20l Jerry cans of high octane. Build a (seriously) tuned engine and start running race fuel.... ooo... it gets quitre pricey.


I still have a 2.5NA Transit diesel engine available if a Pinto replacement looks too thirsty :-)

View User's Profile View All Posts By User U2U Member
Davegtst

posted on 17/4/13 at 05:11 PM Reply With Quote
Get over to pdq. You won't regret it.
View User's Profile View All Posts By User U2U Member
Dopdog

posted on 17/4/13 at 05:16 PM Reply With Quote
Just had my gsxr car done at PDQ first class and he spent loads if time making the fueling right.
View User's Profile View All Posts By User U2U Member
Yellow Peril

posted on 17/4/13 at 06:18 PM Reply With Quote
What do they charge ? Typically...
View User's Profile View All Posts By User U2U Member
Dopdog

posted on 17/4/13 at 10:14 PM Reply With Quote
it was around the £250 mark
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.