greavesy7
|
posted on 28/9/14 at 07:54 AM |
|
|
Full engine package
Looking to update my engine over the winter for a new challenge so I'm selling off my old parts
2.1 pinto with spec as follows
Lightened and balanced bottom end and fly wheel
Big valve head with race cam ( doesn't run too lumps so very drivable)
Vernier pulley
Burton alloy rocker cover
Shortened sump
Fire blade carbs on alloy manifold
Hi gear starter motor
£850
Type 9 gear box with low milage and short throw shifter
£170
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
richwill
|
posted on 28/9/14 at 07:27 PM |
|
|
What sort of power are you getting from the pinto. How many miles has it done?
|
|
greavesy7
|
posted on 28/9/14 at 07:34 PM |
|
|
I've not had it rolling roaded but it pulls very well, it has done about 2000 miles since it was built where is had new rings bearings and stem
seals
|
|
richwill
|
posted on 28/9/14 at 07:51 PM |
|
|
I have a 2.0 pinto installed which has standard efi set up which gives 97 bhp at the wheels. I was looking for a simple increase in power for a winter
upgrade but I'm not sure if this would do the trick.
|
|
greavesy7
|
posted on 28/9/14 at 08:40 PM |
|
|
Typically engines with this spec produce around 140-155 bhp at the flywheel
|
|
greavesy7
|
posted on 29/9/14 at 12:19 PM |
|
|
This package also comes with the zero manifold and exhaust silencer along with a bestec ignition
|
|
dbaz293672
|
posted on 5/10/14 at 09:14 PM |
|
|
U2u sent
|
|
greavesy7
|
posted on 6/10/14 at 08:41 PM |
|
|
Sold
|
|