alfas
|
| posted on 9/1/20 at 12:03 PM |
|
|
Windscreen Frame, Alloy Profile, Striker
can anybody tell me the type of profile sylva used to manufacture the windscreen-surround?
i want to manufacture a speedster screen and therefore need just the sides of the screen surround.
so would be a shame buying a complete surround and immediately "destroy" (cut) it.
|
|
|
|
|
MikeRJ
|
| posted on 9/1/20 at 05:27 PM |
|
|
It's was a simple U section profile on my Striker.
|
|
|
Rich J
|
| posted on 9/1/20 at 10:44 PM |
|
|
Complete flyscreen kit available from RAW if it helps - frame and macrolon "screen"- for not much money - £35 IIRC
[Edited on 9/1/20 by Rich J]
|
|
|
alfas
|
| posted on 10/1/20 at 07:19 AM |
|
|
quote:
Originally posted by MikeRJ
It's was a simple U section profile on my Striker.
exactly... and thats the reason i asked...i need the measurements of this u-profile.
the kit from RAW looks interesting.....but considering that i get the makrolon free of charge and hardly have to pay anything for the aluprofile (if i
would know the size)....plus shipping abroad.....makes no real sense at the end of the day.
|
|
|
40inches
|
| posted on 10/1/20 at 11:58 AM |
|
|
quote:
Originally posted by alfas
quote:
Originally posted by MikeRJ
It's was a simple U section profile on my Striker.
exactly... and thats the reason i asked...i need the measurements of this u-profile.
the kit from RAW looks interesting.....but considering that i get the makrolon free of charge and hardly have to pay anything for the aluprofile (if i
would know the size)....plus shipping abroad.....makes no real sense at the end of the day.
Wouldn't the ally profile used depend on the thickness of Makrolon you decide to use?
|
|
|
alfas
|
| posted on 11/1/20 at 10:33 AM |
|
|
as far as i remember (i dont have the car with me at the moemnt) the profile must be slided downwards into a gap given by the construction of the
car.
so the tickness of the markolon cannot be freely choosen
|
|
|
tbowdery
|
| posted on 12/1/20 at 06:07 PM |
|
|
The windscreen surround on my Striker is made from U-section channel which is 3/4 inch wide x 3/4 inch tall (outside dimensions).
The metal thickness is 1/8 inch on all three sides.
Bought the kit from Sylva back in 1995.
|
|
|
