Board logo

Crossflow Parts Wanted
cfc999 - 10/1/12 at 03:19 PM

Can anyone help me with the folowing parts for my Sylva Striker re-build.

1300 sump (not sure if the 1600 is the same)
Head Gasket
Distributor
Facet Fuel Pump
Spark Plugs
Distributor
Water Pump

Cheers
Chris
Description
Description
Description
Description
Description
Description
Description
Description

[Edited on 10/1/12 by cfc999]

Furyous - 10/1/12 at 04:15 PM

What about a complete 1700 engine/Type 9 gearbox with twin Weber 40s? I'm hoping to have mine out of the car this weekend, but I'm probably keeping the alternator. The Type 9 isn't definitely for sale yet because I want to check the new gearbox fits first.


Probably not what you're after at all, but it's worth a go.

cfc999 - 10/1/12 at 04:36 PM

Thanks for the offer but just after the parts listed at the mo.
Cheers
Chris

D Beddows - 10/1/12 at 04:43 PM

I've got one of the square Facet pumps sat on a shelf doing nothing - just the pump though I think, no unions etc (I'll check if you're interested) Didn't get used for long as I recall but it worked fine......... dunno £20 posted?

MikeR - 10/1/12 at 04:47 PM

1300 sump is smaller than 1600. The smaller stop catches the crank or something when fitted to the larger engine. No proof but a guess says it would be ok your way round but i'd check the oil pickup pipe isn't sitting in thin air.

cfc999 - 10/1/12 at 04:50 PM

quote:
Originally posted by D Beddows
I've got one of the square Facet pumps sat on a shelf doing nothing - just the pump though I think, no unions etc (I'll check if you're interested) Didn't get used for long as I recall but it worked fine......... dunno £20 posted?


Thanks for getting back to me so quickly. Will check and find out exactly which type I need. Not sure if its the red top round type. Going to speak to the chap who's helping me with the re-build tonight and will get back to you.
Cheers
Chris

emidas - 10/1/12 at 05:17 PM

Hi
I've got 1300 sump and distributor (other 1300 x flow parts as well in case your list gets longer).
I'll U2U with details.
Colin

cfc999 - 10/1/12 at 05:21 PM

quote:
Originally posted by emidas
Hi
I've got 1300 sump and distributor (other 1300 x flow parts as well in case your list gets longer).
I'll U2U with details.
Colin

Hi Colin,
Will keep checking my u2u.
Cheers
Chris

mark chandler - 10/1/12 at 06:03 PM

1300 sump is definately shorter and will not fit a 1600 without a beasting with a hammer.

shindha - 10/1/12 at 06:04 PM

I have a dizyy in Birmingham.

cfc999 - 10/1/12 at 06:25 PM

quote:
Originally posted by D Beddows
I've got one of the square Facet pumps sat on a shelf doing nothing - just the pump though I think, no unions etc (I'll check if you're interested) Didn't get used for long as I recall but it worked fine......... dunno £20 posted?

Just sent you a U2U.
Cheers
Chris

cfc999 - 10/1/12 at 06:27 PM

quote:
Originally posted by mark chandler
1300 sump is definately shorter and will not fit a 1600 without a beasting with a hammer.

Im after a 1300 sump for a 1390 engine so think a 1600 should be ok but not too sure about the pick up pipe.
Cheers
Chris

cfc999 - 10/1/12 at 06:30 PM

quote:
Originally posted by shindha
I have a dizyy in Birmingham.

Thanks for the offer. Just waiting for Colin to get back to me, If his is a no good them I'll drop you a line.
Cheers
Chris

cfc999 - 11/1/12 at 12:26 PM

Now sorted with sump, pick up pipe and water pump. Thanks for all your offers.
Still on the look out for a desent dizzy. I'm runnung a pair of 40's so not sure if a standard one is up to the job. Also am I right in thinking I need a angled dizzy cap.

cfc999 - 19/1/12 at 09:00 PM

quote:
Originally posted by shindha

I have a dizyy in Birmingham.


Still on the look out for a replacement dizzy for my 1300 crossflow. Sorry for not getting back to you sooner but been very busy trying to find other parts.
Cheers
Chris