Nash
|
| posted on 3/12/13 at 10:49 PM |
|
|
This is mine in my Indy
........Neil
It's What You Do Next That Counts.
Build It, Buy It, Drive It:
Southern Kit Car Club
|
|
|
|
|
avagolen
|
| posted on 5/1/14 at 08:25 PM |
|
|
This is my addition to the gallery.
Fury - not yet on the road. 
 
Instrument_Panel
The Answer for everything, but never the last word....
|
|
|
robertst
|
| posted on 16/2/14 at 02:07 AM |
|
|
this is mine... and yes, that is a radio, good for blasting music between traffic lights! also i've noticed that two cheap 20w speakers
installed in the right place on the transmission tunnel creates quite a noticeable reverb with the ally panels and they sound quite good!
Tom
|
|
|
SteveWallace
|
| posted on 22/2/14 at 01:50 PM |
|
|
This is mine - MDF base with plumbing pipe for the bottom edge radius, covered with felt backing and then faux leather. ETB gauges:
 
finished dash 1
 
finished dash 3
 
finished dash 2
|
|
|
Dale
|
| posted on 11/3/14 at 05:01 AM |
|
|
After way too much time its pretty much finished- except I broke my temp gauge and need to get a new core(temp sensor tube broken). The insert sits
inside a frame made of 3/4 inch conduit on the bottom 3 pieces. Gauges are made in adobe and the tach and speedo are reverse sweep like the old
maserati of the 30s,40s I have added the family coat of arms to those gauges. The aluminum finish is done with an orbital sander with 80 grit and
coats of clear, I brushed it first but did not like it, so returned to this finish.
Dale
 
Description
 
Description
Thanks
Dale
my 14 and11 year old boys 22
and 19 now want to drive but have to be 25 before insurance will allow. Finally on the road
|
|
|
40inches
|
| posted on 1/4/14 at 08:27 AM |
|
|
Dash take 2
I was 70% happy with the first incarnation. Now, after spending far too much time over the winter, I am 90% happy.
Before and after photos.
 
Description
 
Description
 
Reverse panel
 
Description
Random shots
 
Description
 
Description
 
Description
|
|
|
The Black Flash
|
| posted on 1/4/14 at 10:14 AM |
|
|
Now that is a seriously neat job!
|
|
|
theduck
|
| posted on 1/4/14 at 10:48 AM |
|
|
Quick update to mine now interior is almost finished.
[Edited on 1/4/14 by theduck]
|
|
|
Stot
|
| posted on 6/4/14 at 08:11 AM |
|
|
Here is mine.
Aluminium with an IVA rolled edge covered in a synthetic veneer with an upside-down MX5 dash with new dials mounted into MDF and covered with leather
and foam where needed. LED tell tales and tell tale logos laser etched into the leather.
Cheers
Stot
|
|
|
TimEllershaw
|
| posted on 2/6/14 at 02:00 PM |
|
|
The original - a flat ali sheet with a razor shart bottom edge !
The bare panel :
Looked nice to begin with but soon turned grey and grubby
And with some sticky-back-plastic :
... only later did I realise that I made a copy of a Cateringvan dash :
http://www.teenagecancertrust.org/
|
|
|
sg_frost
|
| posted on 1/9/14 at 07:36 PM |
|
|
|
|
|
rodgling
|
| posted on 9/9/14 at 10:01 AM |
|
|
My new dash layout:
Pleased with how it came out, reasonably neat and the carbon fibre looks good. The dash shift lights are only used for alarms and lap time
information, the shift lights in the drivers eyeline are used for shift light functionality. Dash control buttons mounted on the wheel for easy
access.
An earlier version taken in better light, but with the BMW clocks still present:
[Edited on 9/9/14 by rodgling]
|
|
|
renetom
|
| posted on 9/9/14 at 05:03 PM |
|
|
for sale
Our interior BEC flappy paddle gearshift
 
interior
|
|
|
VERTFELIX
|
| posted on 17/12/14 at 04:14 PM |
|
|
[img]https://picasaweb.google.com/101709997702741930093/DiversSEVEN#5903463905235786610[/img]
|
|
|
VERTFELIX
|
| posted on 17/12/14 at 04:16 PM |
|
|
[img] [/img]
|
|
|
ianm67
|
| posted on 17/12/14 at 05:04 PM |
|
|
Here's the dash ready to be bolted into the Dax
Always biting off more than I can chew.....
|
|
|
Luego.2.0
|
| posted on 14/10/15 at 05:01 PM |
|
|
Here's mine
Veinto 2.0 black top.
Jenevy throttle bodies
Omex ecu
|
|
|
AlanH
|
| posted on 16/2/16 at 12:34 PM |
|
|
Here is a pic of how mine looks just now but I am in the throws of updating it.
A
 
Das
|
|
|
johnemms
|
| posted on 10/3/16 at 02:19 PM |
|
|
MOT due ..3 years old already ! 
Dash looks a bit like spiders eyes ..
Gauges Linky
[Edited on 10/3/16 by johnemms]
Own chassis & Build - First time pass!!
"7's" aren't really "cars", they are 'experiences"
|
|
|
AlanH
|
| posted on 10/3/16 at 07:17 PM |
|
|
Looks good. Is that a choke cable? What carbs are you running?
|
|
|
johnemms
|
| posted on 10/3/16 at 09:07 PM |
|
|
locost Thread..here.
Own chassis & Build - First time pass!!
"7's" aren't really "cars", they are 'experiences"
|
|
|
james h
|
| posted on 29/3/16 at 03:42 PM |
|
|
quote:
Originally posted by johnemms
MOT due ..3 years old already !
Dash looks a bit like spiders eyes ..
Gauges Linky
[Edited on 10/3/16 by johnemms]
Is the right hand gauge a speedo?
|
|
|
johnemms
|
| posted on 29/3/16 at 06:31 PM |
|
|
Its a speedo & rev counter
 
Description
Velona Link..
Glowshift Gauges
My main speedo does not have an odometer that records total mileage for mot/insurance etc.
Regular Type 9 electronic drive runs both speedos.
(can switch it off at night or if you do not want to record total mileage)
Drive at 40mph ..press set.. done.. easy peasy
Programable RPM 0-20000 Min 10 rpm
Speedo 0-250 mph or km/h
DC 9-16v (12v regular)
Conect to OEM sensor
Stainlesss or Black
[Edited on 29/3/16 by johnemms]
Own chassis & Build - First time pass!!
"7's" aren't really "cars", they are 'experiences"
|
|
|
deanspoors
|
| posted on 7/4/16 at 06:31 AM |
|
|
Here's mine on a Westfield Megabusa. Race Technology dash, Savage Switches and FIA cut off on a carbon dash. Pleased with it.
|
|
|
Quinten
|
| posted on 7/4/16 at 10:38 AM |
|
|
Great thread!
4 gauges (water, fuel, rpm, speed), a single side/dipped/main switch, 3 savage switches (hazard, start, fan), 2 indicator buttons on steering wheel,
and a Bright6 module for the warning lights. I like things minimal
|
|
|
