the_big_1
|
| posted on 19/8/19 at 02:37 PM |
|
|
8mm ID or OD
Hi Guys,
when talking about 8mm fuel pipe for a 2.0L Zetec on standard injection, are we talking ID of pipe, so 8mm inside, 10 out etc or 8mm outside, 6mm
inside etc.?
|
|
|
|
|
Bunje
|
| posted on 19/8/19 at 04:09 PM |
|
|
i always thought it was the internal size of the pipe.
|
|
|
40inches
|
| posted on 19/8/19 at 04:09 PM |
|
|
All sizes are O/D unless otherwise stated 
|
|
|
40inches
|
| posted on 19/8/19 at 04:10 PM |
|
|
quote:
Originally posted by Bunje
i always thought it was the internal size of the pipe.
Hose is bore, pipe/tubing is O/D.
|
|
|
the_big_1
|
| posted on 19/8/19 at 04:12 PM |
|
|
There lies the confusion. Should it be 8mm inside or outside lol
|
|
|
40inches
|
| posted on 19/8/19 at 04:19 PM |
|
|
quote:
Originally posted by the_big_1
There lies the confusion. Should it be 8mm inside or outside lol
I used 8mm O/D from tank to swirl pot in engine bay, the fuel rail connector (OEM) is
6mm!!
However 3 litre V6, 7200 rpm and 272bhp at 7200rpm, so it can't be wrong 
|
|
|
the_big_1
|
| posted on 19/8/19 at 04:39 PM |
|
|
Any idea what the ID was? 8mm OD pipe will be larger ID than 8mm hose?
|
|
|
40inches
|
| posted on 19/8/19 at 05:02 PM |
|
|
quote:
Originally posted by the_big_1
Any idea what the ID was? 8mm OD pipe will be larger ID than 8mm hose?
8mm O/D pipe will be 6mm-ish bore,
Hose is sized by bore, so 8mm tubing needs 8mm hose.
R9 8mm hose will be about 13/14mm O/D.
|
|
|
the_big_1
|
| posted on 19/8/19 at 05:05 PM |
|
|
Hi,
So as long as ID is 6mm or more, should be fine then?
|
|
|
40inches
|
| posted on 19/8/19 at 05:15 PM |
|
|
quote:
Originally posted by the_big_1
Hi,
So as long as ID is 6mm or more, should be fine then?
It was on my 3litre Jag engine. All the original fuel piping on the engine was 8mm nylon.
You will find that Injection filters usually have 8mm connections.
|
|
|
the_big_1
|
| posted on 19/8/19 at 05:19 PM |
|
|
Hi ya,
I did read that but like others, I wasnt sure that ment that the connection was OD 8mm for an ID 8mm pipe or hose etc lol
So I guess the ID of say the 8mm fuel filter will be a bore size of approx 6mm
|
|
|
big_wasa
|
| posted on 19/8/19 at 05:35 PM |
|
|
Zetec ?
How are you joining the pipe to the rail ? The rail itself has 8mm or 5/16 ends but theY are not designed to take the pipe direct. If you have the Oem
connectors they are an odd size. You can get aftermarket quick disconnect adapters but there usually to an an6 fitting.
|
|
|
the_big_1
|
| posted on 19/8/19 at 05:42 PM |
|
|
Hi ya,
I haven't got that far yet. Will have to have a search online for the quick connector
|
|
|
40inches
|
| posted on 19/8/19 at 09:59 PM |
|
|
quote:
Originally posted by big_wasa
Zetec ?
How are you joining the pipe to the rail ? The rail itself has 8mm or 5/16 ends but theY are not designed to take the pipe direct. If you have the Oem
connectors they are an odd size. You can get aftermarket quick disconnect adapters but there usually to an an6 fitting.
I cut the nylon tubing from the OEM connector, it has barbs on the fitting,and pushed R9 hose in it's place.
 
Description
|
|
|
the_big_1
|
| posted on 20/8/19 at 06:19 AM |
|
|
Yeah looking at the same but haven't found an original connector yet lol
|
|
|
Bunje
|
| posted on 20/8/19 at 07:02 AM |
|
|
are you talking about rubber hose here or something else
https://www.halfords.com/workshop-tools/garage-equipment/fuses-electricals-fixings/halfords-fuel-hose-8mm-hfh402
theres a picture on halfrauds site showing the pipe size
|
|
|
the_big_1
|
| posted on 20/8/19 at 07:11 AM |
|
|
hi ya,
Its a quick connect that clips on to the fuel rail I will need.
Cheers,
|
|
|
40inches
|
| posted on 20/8/19 at 08:30 AM |
|
|
quote:
Originally posted by the_big_1
hi ya,
Its a quick connect that clips on to the fuel rail I will need.
Cheers,
If its a chrome fitting, as in my photo, it's actually in 2 pieces.
The large part the hose pushes on is held by a circular spring that you have to release, I used
a roiled up piece of thin plastic. It,s a bit fiddly
If it,s plastic, can't help you.
With regard to hose, I used THIS
It's been on the car 8 years and still good.
|
|
|
40inches
|
| posted on 20/8/19 at 08:36 AM |
|
|
My connector looks like THIS
Later fittings are like
THIS
|
|
|
