takumi
|
posted on 29/7/08 at 07:52 PM |
|
|
Pinto head bolt size/thread/length
hi there,
does anyone have to hand or off the top off their heads know the size of pinto heads bolts.. size/thread/length
thanks
Tak
RobinHood 2B 2.0i pinto, Keihin 38mm Carbs, lightened flywheel, O'Mori remote filter kit, 10 row oil cooler. Modified head, 10.2cr, special
valves FR22 cam, 4- 1 header.
|
|
|
jamesbond007ltk
|
posted on 29/7/08 at 08:42 PM |
|
|
M12 x 1.75 x 92.5
Just happen to have a set handy as I have had some head work done recently
Rich
|
|
PAULD
|
posted on 29/7/08 at 08:42 PM |
|
|
pinto head bolts
just measured one. m12 (1.75 pitch)*95mm.
|
|
jamesbond007ltk
|
posted on 29/7/08 at 08:44 PM |
|
|
M12 x 1.75 x 92.5
Just happen to have a set handy as I have had some head work done recently
Rich
|
|
PAULD
|
posted on 29/7/08 at 08:44 PM |
|
|
pinto head bolts
just measured one. m12 (1.75 pitch)*95mm.
|
|
takumi
|
posted on 29/7/08 at 08:45 PM |
|
|
thanks for the replies.
didnt think it was an m12! hehe! thanks for the info guys,
much appreciated.
RobinHood 2B 2.0i pinto, Keihin 38mm Carbs, lightened flywheel, O'Mori remote filter kit, 10 row oil cooler. Modified head, 10.2cr, special
valves FR22 cam, 4- 1 header.
|
|
mcerd1
|
posted on 30/7/08 at 09:37 AM |
|
|
just out of interest, why do you want to know ?
(btw - I'll probably have a spare set or two of bothe the early and late types)
|
|
takumi
|
posted on 30/7/08 at 07:55 PM |
|
|
just curious , getting some new HT bolts before I take the old head off, so I've got everything I need to change it over ready.
Just had the head back from Coltec and they reccomended using HT (12.9) socket head bolts over standard head bolts, to give it a bit more pinch..
[Edited on 30-7-08 by takumi]
RobinHood 2B 2.0i pinto, Keihin 38mm Carbs, lightened flywheel, O'Mori remote filter kit, 10 row oil cooler. Modified head, 10.2cr, special
valves FR22 cam, 4- 1 header.
|
|
Mark Allanson
|
posted on 31/7/08 at 08:43 PM |
|
|
Some pinto's require stretch bolts, I cannot remember which though - sorry
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|