Board logo

Parts clearout
striker1660 - 15/9/13 at 11:12 AM

Heater /demister - as new £18 delivered




sierra diff 3.92 push in type - £40 plus delivery or pick up




Triumph throttle bodies t600 - throttles 45mm and 36.5 mm diameter either side. £50 delivered





bmw k1100 radiator and fan - ideal for bike engined car - £30 delivered





Brembo alloy calipers same size as m16's apart from mounting holes . Need bracket. Alot lighter than m16's £68 pair delivered







Zetec coil pack with silicon leads for crossflow - £20 delivered






Sylva striker pair of green brg front wings - £20 delivered

sorry photo will not upload. send u2u with email address if interested.

All the above need to go. i prefer the phoen so email your contact number if you have any queries.

Thanks for looking


ian.stewart - 15/9/13 at 07:46 PM

Hi,
I Might be interested in the rad, can you let me have the sizes, any more pics????
Regards
Ian.


rost - 16/9/13 at 12:44 PM

Calipers look like Alfa (75) one's fwiw These are indeed very light!

[Edited on 16/9/13 by rost]


striker1660 - 16/9/13 at 05:41 PM

correct on the calipers


striker1660 - 16/9/13 at 05:42 PM

rad size 480 (rad core 360mm) by 240 mm. all approximately


ian.stewart - 16/9/13 at 06:07 PM

Thanks for the dimensions, its too small,


striker1660 - 16/9/13 at 06:09 PM

it was good for a k1100cc engine?


ian.stewart - 16/9/13 at 06:46 PM

I dont doubt it will cool the my engine, its the physical size will be too small for my rad shell, The rad shell I am using is the same as the ones hanging up.


striker1660 - 16/9/13 at 06:51 PM

understand