So I've recently bought a Fisher fury with a fire blade engine 90% complete. I'm looking to put it through an iva test next year fingers crossed.

Jobs to be completed for Iva test
• stamp chassis number & fit chassis plate
•electric reverse
• clip throttle & clutch cable ✔
• renew dashboard (switches as well)
• fit mirrors
• nut&bolt covers
• track rod end covers
•Handbrake light switch✔
•low brake fluid switch✔

Other jobs:
Service engine
Longer wheel studs
Re pipe coolant to radiator
Make windscreen
Fit seats & harnesses

Here's some photos of the car, if anyone else can think of anything that needs doing for the iva test feel free to comment, I will be having a good read through the guidelines. Hoping to take it on track this summer😜



[Edited on 15/5/19 by Jordan]

The switch on the handbrake is only a way to test that the low brake fluid warning light is working. I've just got a push button on the dash for mine.

Good luck with the car BTW, and welcome to Fury ownership

Thanks, I might buy a new brake fluid cap with the switch built in and wire it to a switch on the dash, my handbrake switch is the ones with the spring.

How do I upload photos on this build?

https://www.dropbox.com/s/f86fnib1v014402/fisher%20fury.jpg

[Edited on 16/5/19 by Jordan]

[Edited on 16/5/19 by Jordan]

[Edited on 16/5/19 by Jordan]

[Edited on 16/5/19 by Jordan]

welcome to the joys of the Fury!
A spectacular car.

I am sure that Adithorpe on here won't mind me noting that he is a mine of useful information.

Been busy with the fury, recently fitted An oil cooler, longer oversized wheel studs front & rear and a new dashboard with a digital speedo a few other bits and pieces and I'll be looking to do a track day!

https://photos.app.goo.gl/HCpxBmGBsxTpzVFx6